Hyne Tim­ber’s T3 Green Plus de­liv­ers treat­ment revo­lu­tion

Australasian Timber - - NEWS -

AF­TER YEARS of de­vel­op­ment and sci­en­tific test­ing, Hyne Tim­ber has fur­ther en­hanced its in­no­va­tor rep­u­ta­tion by suc­cess­fully achiev­ing what was thought to be un­achiev­able -- T3 Green Plus, the new and im­proved, water-based, CodeMark cer­ti­fied fu­ture of out­door struc­tural fram­ing.

Hyne Tim­ber’s Gen­eral Man­ager, Cus­tomers, Peter Hyne, said this new gen­er­a­tion H3 treat­ment for­mula pro­vided sig­nif­i­cant ben­e­fits to tim­ber users.

“We have lis­tened to our cus­tomers and in­tro­duced new tech­nol­ogy that will ex­ceed ex­pec­ta­tions in sev­eral ways,” Mr Hyne said.

“T3 Green Plus will not only pro­vide im­proved re­sis­tance to ter­mites and fun­gal at­tack, but it will also pro­vide the safest and most en­vi­ron­men­tally friendly H3 soft­wood prod­uct in Aus­tralia.

“T3 Green Plus, with its low odour and no VOC treat­ment for­mu­la­tion, is now also suit­able for in­door fram­ing ap­pli­ca­tions, which may be in­ad­ver­tently ex­posed to mois­ture. This in­cludes kitchens, laun­dries, bath­rooms and in par­tic­u­lar flood prone struc­tures,” Mr Hyne said.

Fur­ther to their in­ter­nal prod­uct con­trols and guar­an­tee, T3 Green

Plus has al­ready achieved CodeMark cer­ti­fi­ca­tion. This is a third-party au­dited cer­ti­fi­ca­tion scheme de­signed and man­aged by the Aus­tralian Build­ing Codes Board (who de­velop and man­age the build­ing codes and stan­dards), and pro­vides Hyne Tim­ber’s cus­tomers with a new level of treat­ment qual­ity as­sur­ance.

“As an Aus­tralian busi­ness, Hyne Tim­ber au­dits many aspects of our op­er­a­tions, some of which are re­quired legally.

“How­ever, we came to re­alise that one as­pect of our busi­ness that is very im­por­tant to our cus­tomers

– our prod­uct treat­ments – had no in­de­pen­dent au­dit­ing re­quire­ments in place.

“We set about chang­ing this in a way that would both hold our­selves ac­count­able and bring peace of mind to our cus­tomers,” Mr Hyne said.

“In a time of in­dus­try-wide con­cern over non-com­pli­ant prod­ucts, our CodeMark cer­ti­fi­ca­tion gives Hyne Tim­ber’s cus­tomers con­fi­dence in the qual­ity and con­sis­tency of our T3 Green Plus prod­uct treat­ments that they’re ab­so­lutely fit for pur­pose,” Mr Hyne said.

CodeMark cer­ti­fi­ca­tion is held by a long list of pop­u­lar and high qual­ity build­ing prod­ucts as it also sup­ports the in­tro­duc­tion of new and in­no­va­tive so­lu­tions.

It fol­lows an ex­tended and rig­or­ous process of eval­u­a­tion against the prod­ucts them­selves, the man­u­fac­tur­ing pro­cesses and a demon­stra­tion of how man­u­fac­tur­ing pro­cesses can guar­an­tee con­tin­ued com­pli­ance.

Pro­duc­tion of T3 Green Plus started late last year at the Tum­barumba

Mill in NSW with the Tuan Mill in Queens­land set to fol­low soon.

“In a time of in­dus­try-wide con­cern over non­com­pli­ant prod­ucts, our CodeMark cer­ti­fi­ca­tion gives Hyne Tim­ber’s cus­tomers con­fi­dence in qual­ity and con­sis­tency”

■ Hyne Tim­ber’s Gen­eral Man­ager, Cus­tomers, Peter Hyne.

Newspapers in English

Newspapers from Australia

© PressReader. All rights reserved.