John Deere 4640 uni­ver­sal dis­play

Farms & Farm Machinery - - Contents - John Deere re­leases 4640 Uni­ver­sal Dis­play

The new John Deere 4640 Uni­ver­sal Dis­play gives trac­tor op­er­a­tors the abil­ity to use the com­pany’s most com­mon and pop­u­lar ap­pli­ca­tions, in­clud­ing Au­toTrac, doc­u­men­ta­tion and Sec­tion Con­trol, in a por­ta­ble dis­play.

The new Gen­er­a­tion 4 oper­at­ing sys­tem is de­signed to im­prove data col­lec­tion and ap­pli­ca­tion func­tion­al­ity.

“Some en­hance­ments built into the dis­play in­clude more on-screen help and di­ag­nos­tic in­for­ma­tion to keep op­er­a­tors run­ning and in­formed of their dis­play ca­pa­bil­i­ties, sim­pli­fied

Work Setup app with page-by-page nav­i­ga­tion, and greater user cus­tomi­sa­tion of run pages,” John Deere pro­duc­tion and pre­ci­sion ag mar­ket­ing man­ager John Mish­ler says.

The 4640 dis­play also pro­vides doc­u­men­ta­tion for high-speed plant­ing and nu­tri­ent ap­pli­ca­tions, to­gether with data sync­ing func­tion­al­i­ties.

The dis­play is de­signed to im­port new cus­tomer and prod­uct in­for­ma­tion with­out the risk of over­writ­ing ex­ist­ing client, farm or field guid­ance in­for­ma­tion, ac­cord­ing to John Deere.

An ad­di­tional fea­ture al­lows for wire­less data trans­fer

(WDT), with a data sync fea­ture for au­to­matic doc­u­men­ta­tion trans­mis­sion to John Deere’s Op­er­a­tions Centre.

A power but­ton has also been added to the back of the 4640 dis­play mon­i­tor, so op­er­a­tors can turn off the dis­play or re­boot with­out pow­er­ing down the trac­tor.

Im­prove­ments to Gen­er­a­tion 4 ap­pli­ca­tions such as Au­toTrac, Sec­tion Con­trol and doc­u­men­ta­tion are said to re­duce over­laps and skips, and max­imise in­puts and field op­er­a­tions.

Pre­ci­sion ag soft­ware for the 4640 dis­play is avail­able in only one- or five-year sub­scrip­tions with two op­tions: the Au­toTrac only; or the Pre­ci­sion Ag Core sys­tem that in­cludes sec­tion con­trol as well as Au­toTrac, which gives cus­tomers greater flex­i­bil­ity to match soft­ware sub­scrip­tions to their needs, Mish­ler says.

“John Deere is the only sup­plier to of­fer ma­chine-based pre­ci­sion ag sub­scrip­tions that al­low cus­tomers to se­lect the soft­ware they want and the du­ra­tion of the sub­scrip­tion,” Mis­chler says.

The 4640 is avail­able for or­der now, and is com­pat­i­ble with John Deere’s 30 se­ries, through to the lat­est 6R, 7R, 8R and 9R se­ries trac­tors. An ex­tended mon­i­tor is also set to be avail­able from mid-July.

Newspapers in English

Newspapers from Australia

© PressReader. All rights reserved.