4WDrive - - Product Showcase -

This new up­grade kit fea­tures both a new drag link flip sys­tem and the pop­u­lar JKS6200 con­trol arm re­lo­ca­tion bracket sys­tem all in one kit. This up­grade kit is de­signed to work with JK lift sys­tems of 2.5 to 5-in of lift.

This in­stal­la­tion re­quires drill out the steer­ing arm ta­pered hole in the pas­sen­ger’s side knuckle and in­stalling a pre­ci­sion ma­chined ta­pered in­sert. The in­sert has a knurled outer sur­face and has a slight in­ter­fer­ence fit mak­ing it ex­tremely strong and elim­i­nates any pos­si­bil­ity of play or loos­en­ing. The drag link flip flat­tens out the steer­ing an­gles when com­bined with the lift heights men­tioned and pro­vides bet­ter, more solid steer­ing. To prop­erly com­pli­ment the new steer­ing an­gles, a front track bar bracket is supplied that mounts to the fac­tory mount. This new bracket not only adapts the fac­tory mount for proper track bar an­gles, it also strength­ens the fac­tory setup by ty­ing into the axle via a U-bolt setup in­te­grated into the de­sign. The new track bar lo­ca­tion mim­ics the drag link an­gle per­fectly and elim­i­nates bump steer. In or­der to ac­com­mo­date these two new com­po­nents, 3-in tall front alu­minum bump stop ex­ten­sions are in­cluded to pro­vide the proper clear­ance at full bump.

Part Num­ber: 2450 | Price: $656.00 | www.jksmfg.com

Newspapers in English

Newspapers from Canada

© PressReader. All rights reserved.