AeroTherm’s Du­plex Stain­less Steel Tube Bun­dle

Chemical Industry Digest - - Products & Processes - Aero Therm Sys­tems Pvt Ltd, En­dress+Hauser Inc.

Aerotherm of­fers op­ti­mum grade Du­plex Stain­less Steel Tube Bun­dle. The bun­dle is fab­ri­cated by engi­neers us­ing pre­mium qual­ity raw ma­te­rial in ac­cor­dance with the in­dus­try laid stan­dards & norms.

They are widely used in the petro­chem­i­cal plants. These du­plex stain­less steel tube bun­dles are highly ap­pre­ci­ated among the clients for their longer func­tional life and rust proof prop­er­ties.

Spec­i­fi­ca­tions:

• Tube sheet: SS-304

• Tube size: 3/4” OD x 14 BWG

• ‘U’ tube length: 2000 mm

• No of ‘U’ tubes: 46 Nos.

• Tube ma­te­rial: Stain­less steel as per SA213TP 304 (in­te­grally finned)

For more in­for­ma­tion, con­tact:

Ahmed­abad Tel: 079-25890158

Email: con­tact@aerothermsys­tems.com Web: www.aerothermsys­tems.com ing, fewer pe­ri­ods of down­time, and there­fore a more ef­fi­cient process con­trol.

Mul­ti­vari­able and high-qual­ity sen­sors

Pro­line 300/500 trans­mit­ters can be freely com­bined with any of the Pro­mass and Pro­mag sen­sors. Sev­eral process vari­ables can there­fore be mea­sured si­mul­ta­ne­ously us­ing only one de­vice – for ex­am­ple mass flow, vol­ume flow, den­sity, con­cen­tra­tion, vis­cos­ity and tem­per­a­ture (Co­ri­o­lis); or vol­ume flow, tem­per­a­ture and con­duc­tiv­ity (elec­tro­mag­netic). Each de­vice is checked us­ing ac­cred­ited and trace­able cal­i­bra­tion fa­cil­i­ties (ISO/IEC 17025).

Us­ing Pro­line 300/500, process in­for­ma­tion, di­ag­nos­tics, de­vice in­for­ma­tion can be re­turned via con­trol rooms as well as ac­cessed through con­nected lap­tops. Com­pre­hen­sive re­mote data re­trieval is also pos­si­ble via the in­stalled wire­less WLAN – a global in­no­va­tion that will sim­plify fu­ture ser­vice and main­te­nance.

Heart­beat Tech­nol­ogy – al­ways on the pulse of the process

A fur­ther high­light is Heart­beat Tech­nol­ogy. In­te­grated into all Pro­line de­vices, this check­ing func­tion en­ables per­ma­nent self-di­ag­no­sis, along with a cer­ti­fied and metro­log­i­cally trace­able ver­i­fi­ca­tion dur­ing op­er­a­tion. The op­er­a­tor does not need to be present in the field: Ver­i­fi­ca­tion can be started at any time via all avail­able in­ter­faces.

Pre­pared for In­dus­try 4.0

Pro­line 300/500 has a unique range of sig­nal out­puts and pro­to­cols: HART, PROFIBUS, FOUN­DA­TION field­bus, Mod­bus RS485, EtherNet/IP and PROFINET. This en­sures that all En­dress+Hauser flowme­ters can be seam­lessly in­te­grated into ex­ist­ing au­to­ma­tion sys­tems.

For more in­for­ma­tion, con­tact: Email: info@us.en­dress.com Web­site: www.us.en­dress.com

Newspapers in English

Newspapers from India

© PressReader. All rights reserved.