Nip­man Fas­tener looks at CV in­dus­try for growth

Nip­man Fas­tener In­dus­tries is ex­pand­ing its prod­uct range to cater to the CV in­dus­try.

Commercial Vehicle - - WHAT'S INSIDE - Story by: Bhar­gav TS

Nip­man Fas­tener In­dus­tries is ex­pand­ing its prod­uct range to cater to the CV in­dus­try among a few other in­dus­tries in an ef­fort to grow.

Nip­man Fas­tener In­dus­tries Pvt. Ltd. was es­tab­lished in 1997, and spe­cialises in the man­u­fac­ture of stan­dard and spe­cial fas­ten­ers. Cater­ing to the needs of auto com­po­nents man­u­fac­tur­ers, the com­pany, in its pur­suit for growth, is look­ing at the CV in­dus­try. Keen to ad­dress the needs of the CV in­dus­try by lever­ag­ing its ex­pe­ri­ence and in­fra­struc­ture, the com­pany is cur­rently serv­ing auto com­po­nents man­u­fac­tur­ers like Ab­hishek In­dus­tries, A.G. In­dus­tries, IFB In­dia, Hema Engi­neer­ing, Hero Moto Corp., Hero Mo­tors, Kr­ishna Maruti, Rico Auto In­dus­tries, Rock­man In­dus­tries, Subros, Sun­beam Auto Com­po­nents, Trelle­borg Au­to­mo­tive, Mun­jal Showa, Omax Au­tos, Sand­har In­dus­tries, and Unitech Ma­chines. Apart from the CV in­dus­try, Nip­man Fas­tener In­dus­tries is also keen to ad­dress the needs of the trac­tor in­dus­try as well. Spe­cial­is­ing in cold forg­ing, the com­pany, ac­cord­ing to Anup Ka­pur, Vice Pres­i­dent, Busi­ness Devel­op­ment and Mar­ket­ing, is mov­ing up the value chain. “By en­ter­ing into the CV and trac­tor space, we will serve the en­tire auto in­dus­try,” he ex­pressed. Hint­ing at at­tain­ing an am­i­ca­ble bal­ance be­tween the vol­ume in­ten­sive two wheeler and pas­sen­ger ve­hi­cle in­dus­tries, and the trac­tor and CV in­dus­tries, Nip­man Fas­tener In­dus­tries is seek­ing growth by ex­pand­ing its reach in newer ar­eas of the auto in­dus­try, and in­dus­tries that are al­lied to the auto in­dus­try. It was af­ter much de­lib­er­a­tion, said Ka­pur, that the de­ci­sion to in­vade the CV and trac­tor in­dus­tries was taken.

Man­u­fac­tur­ing fas­ten­ers in the 4mm to 24mm di­am­e­ter range, and of nu­mer­ous types, Nip­man Fas­tener In­dus­tries is well aware of the need to sup­ply hot forged fas­ten­ers to the CV in­dus­try in par­tic­u­lar. Pro­duc­ing counter sunk screws, bolt flange spher­i­cal screws, round head screws and bolts, hex head col­lar screws and bolts, shoul­der head spe­cial bolts, flange screws and bolts, self tap­ping screws, socket flange screws, hex head col­lar screws and bolts, weld screws, socket head cap screws and bolts, en­gine studs, and nu­mer­ous other types of studs, the com­pany has stud­ied the fas­tener re­quire­ments of the CV in­dus­try. Stated Ka­pur, “Com­mer­cial ve­hi­cles need 28 mm to 30 mm di­am­e­ter hot forged fas­ten­ers.” “Our core strength lies in cold forg­ing,” he said as a mat­ter of fact. Op­er­at­ing with a phi­los­o­phy to achieve the best, the com­pany is in­vest­ing in hot forg­ing tech­nol­ogy to be able to ad­dress the need of the CV in­dus­try. Nip­man Fas­tener In­dus­tries has four man­u­fac­tur­ing

⇦ Nip­man Fas­tener In­dus­tries man­u­fac­tures a wide range of fas­ten­ers for the auto in­dus­try.

Newspapers in English

Newspapers from India

© PressReader. All rights reserved.