RA­DIUS IN­DUS­TRIES

Electronics Bazaar - - Regional Focus - In­der­preet Singh Bin­dra,

Ra­dius In­dus­tries is an ISO 9001-2008 cer­ti­fied (for qual­ity man­age­ment sys­tems) com­pany. It was set up over four decades ago with the founder’s vi­sion to meet the grow­ing de­mands of the in­dus­try. M.S. Bin­dra, the founder, de­cided to of­fer in­ter­na­tional qual­ity re­li­able elec­tronic com­po­nents un­der the brand name Rad­com. This was done to fill the big vac­uum caused by a lack of good qual­ity com­po­nents, with the in­dus­try some­how manag­ing with low grade com­po­nents. Within 10 years, Rad­com’s high qual­ity and ex­tremely re­li­able com­po­nents en­sured the brand emerged as a sin­gle source of­fer­ing mul­ti­ple com­po­nents.

At Rad­com, the em­pha­sis is mainly on qual­ity and service. Its sat­is­fied cus­tomers en­cour­age it to keep adding newer com­po­nents to meet all their needs from one sin­gle source. Rad­com of­fers com­plete com­po­nent so­lu­tions for 1 amp, 2 amp and up to 6 amp ap­pli­ca­tions. Apart from mo­bile bat­tery charg­ers, the com­pany of­fers a set of com­po­nents for use in the man­u­fac­ture of LED bulbs and LED driv­ers. Re­cently, the com­pany in­tro­duced power tran­sis­tors in TO3 and TOP3 pack­ages. Th­ese tran­sis­tors are pri­mar­ily used in PA sys­tems.

Rad­com also of­fers the com­plete bas­ket of com­po­nents for LED driver ap­pli­ca­tions. The com­pany’s range con­sists of MOSFETs, MOVs, NTCs, tran­sis­tors, power tran­sis­tors, diodes, LEDs, re­sis­tors, ca­pac­i­tors (ce­ramic, polyester and elec­trolytic), rec­ti­fiers, bridges, Schot­tky diodes, thyris­tors, di­acs, tri­acs, SCRs, volt­age reg­u­la­tors, TVs and ICs, etc. Its new prod­ucts have also been very well ac­cepted by the in­dus­try.

The com­pany caters to dif­fer­ent sec­tors like com­mu­ni­ca­tions, power elec­tron­ics, con­sumer elec­tron­ics and light­ing. One of Rad­com’s ob­jec­tives is to cater to qual­ity-con­scious OEMs. The com­pany also pro­vides com­plete com­po­nent so­lu­tions, espe­cially for CFLs, elec­tronic bal­lasts and mo­bile charg­ers.

In-house test­ing fa­cil­ity: To en­sure that its cus­tomers get noth­ing but the best in qual­ity, with zero per cent re­jec­tion of its com­po­nents, Rad­com has set up its own in-house test­ing fa­cil­i­ties at Okhla in New Delhi. Th­ese have been in­stalled with CNC (com­put­erised nu­mer­i­cally con­trolled) diode test­ing ma­chines, ca­pac­i­tor test­ing ma­chines, com­put­erised tran­sis­tor testers, tem­per­a­ture pro­fil­ers and var­i­ous other ma­chines to en­sure zero re­jec­tion of com­po­nents.

Sales net­work: Rad­com has fullfledged sales and mar­ket­ing teams at its head of­fice in Okhla, New Delhi. The na­tional sales net­work con­sists of a strong chain of com­pe­tent dis­trib­u­tors and deal­ers, spread all over the coun­try.

In­fra­struc­ture and in­ter­na­tional tieups: Rad­com has man­u­fac­tur­ing tie-ups with some of the lead­ing in­ter­na­tional spe­cial­ists in their re­spec­tive fields. Its tech­ni­cal spe­cial­ists and en­gi­neers con­duct QC at all stages of pro­duc­tion, start­ing from chip fab­ri­ca­tion to the pack­ag­ing of prod­ucts, to en­sure that the cus­tomer gets a flaw­less prod­uct.

Con­tact de­tails: S-57, Okhla In­dus­trial Area, Phase II, New Delhi-110020; Ph-:+91 11 26386843, 26383057; sales@rad­com­semi.com; www.rad­com­semi.com

di­rec­tor

Newspapers in English

Newspapers from India

© PressReader. All rights reserved.