LET THE TRANS­FOR­MA­TION BE­GIN!

FROM ZERO TO HERO

HWM (Malaysia) - - TRANSFORM MY RIG -

Now that we’ve got the list of com­po­nents all sor ted out, it’s time to let the trans­for­ma­tion be­gin! Putting the rig to­gether though, is a pretty much straight­for ward task. All you need are a cou­ple of hours, a mag­netic Phillips screw­driver, and a brightly lit room. Once you’ve got ever ything, it’s time to be­gin assem­bly of the new rig!

STEP 1

Place the moth­er­board on a static-free sur face. Now, place the CPU into the CPU socket, mak­ing sure the ar­rows on the CPU and the CPU socket are aligned.

STEP 2

In­sert the RAM mod­ules into the RAM slots. Again, make sure the notches are aligned.

STEP 3

Mount the moth­er­board into the cas­ing by prop­erly plac­ing screw mounts in the right sock­ets of the cas­ing. Re­fer to the man­ual for proper screw mounts place­ment. Once the moth­er­board and I/O shield are in place, se­cure the moth­er­board with the proper screws.

STEP 4

Inser t the graph­ics card by re­mov­ing some of the cas­ing’s back­plates and align­ing the card to the PCI-E slot.

STEP 5

Se­cure the SSHD to the ap­pro­pri­ate SSD mount in the cas­ing.

STEP 6

In­stall the Power Sup­ply and con­nect all the nec­es­sar y power ca­bles, SATA ca­bles and jumper ca­bles. That’s it!

Newspapers in English

Newspapers from Malaysia

© PressReader. All rights reserved.