Touch-screen weld­ing unit with au­to­mated and man­ual weld­ing ap­pli­ca­tions

DEMM Engineering & Manufacturing - - PRODUCT WATCH -

New from Cas­tolin Eu­tec­tic comes the EuTronic GAP 2501DC PTA weld­ing sys­tem for pre­ci­sion and high de­posit qual­ity in join­ing, coat­ing and braz­ing weld­ing.

The weld­ing unit has been de­signed for in­te­grat­ing with both au­to­mated process and man­ual weld­ing ap­pli­ca­tions in­clud­ing PTA,TIG and MMA weld­ing.

A user friendly 5.7-inch touch screen con­trol panel with newly de­vel­oped user in­ter­face al­lows the op­er­a­tor a sim­pler and faster pre-se­lec­tion of weld­ing pa­ram­e­ters and is de­signed to work with welder gloves on.

All the set­tings are dis­played on the touch screen with 1000 mem­ory lo­ca­tions avail­able. The in­verter de­liv­ers 2-250A, which is suf­fi­cient for al­most all pow­der ap­pli­ca­tions.

Op­tional fea­tures are avail­able such as fully elec­tronic gas con­trol and sec­ond mo­tor con­trol card to op­er­ate a sec­ond pow­der feeder, and an ex­tended au­to­ma­tion in­ter­face for full in­te­gra­tion in an au­to­mated process.

The GAP (Gas Arc Process) tech­nol­ogy de­vel­oped by Cas­tolin Eu­tec­tic – dis­trib­uted na­tion­ally by Smenco – is de­signed for work that re­quires ex­tra pre­ci­sion, low heat gen­er­a­tion and min­i­mal dis­tor­tion. The tech­nol­ogy also pro­vides an ex­cep­tion­ally high pu­rity and qual­ity of the weld­ing bead from the very first layer.

In con­junc­tion with the high ef­fi­ciency of the process, the pre­cise con­trol of the layer thick­ness and the smooth weld beads, these ad­van­tages gen­er­ate con­sid­er­able economies by cut­ting both op­er­at­ing costs and weld­ing con­sum­able re­quire­ments.­quiry #D131206a

Newspapers in English

Newspapers from New Zealand

© PressReader. All rights reserved.