Click and dry spray noz­zle

DEMM Engineering & Manufacturing - - PRODUCT WATCH -

Spray Noz­zle en­gi­neer­ing based in Hamil­ton con­tin­ues to in­crease safety with the in­no­va­tive Click and Dry spray dry noz­zle.

This in­creased safety comes in the form of an im­proved seal­ing sys­tem us­ing an ax­ial face-to-face seal pro­vid­ing much higher pres­sure han­dling abil­ity over the con­ven­tional ra­dial seals that are limited due to the gap that ex­ists in the plug and socket sys­tem.

This com­bined with a cap de­sign that meets in­ter­na­tional recog­nised pip­ing code com­pli­ance takes away risk of non­con­for­mance.

Recog­ni­tion by dairy giant Fon­terra of the Click and Dry de­sign was ref lected by it be­ing nom­i­nated a fi­nal­ist in the 2013 Ven­dor awards in the cat­e­gory ‘Ex­cel­lence in Sup­port­ing Prod­uct De­vel­op­ment in dairy’. This was awarded for re­duc­ing scorched par­ti­cles, which will in turn re­sult in a po­ten­tial drier fire.

Some eight years ago, the com­pany solved the prob­lem of drip­ping noz­zles in dry­ers with its patented ‘Drip -Pro Spray Dry Noz­zle Check Valve Sys­tem’ re­duc­ing con­tam­i­na­tion and clean­ing.

This is an op­tional item, and if you de­cide fol­low­ing the ini­tial in­stal­la­tion that drip is oc­cur­ring you can then in­stall without the need for re­work of the lance.

Con­tact sales@spraynoz­zle.co.nz

Newspapers in English

Newspapers from New Zealand

© PressReader. All rights reserved.