Treotham Au­to­ma­tion’s BIG wiring en­clo­sure gives more space

DEMM Engineering & Manufacturing - - ELECTRICAL TECHNOLOGY -

The BIG se­ries by ILME in­tro­duces a sig­nif­i­cant change in the de­sign of hoods and has been specif­i­cally de­signed to meet the di­verse re­quire­ments of the wiring mar­ket.

The new en­clo­sures in­te­grate the ex­ist­ing range and are ideal for in­stal­la­tions with struc­tured and com­plex wiring.

The large di­men­sions of these in­no­va­tive en­clo­sures have been cho­sen to of­fer cus­tomers an ad­e­quate space to store con­duc­tors.

The width of the new BIG en­clo­sures is greater com­pared to those of pre­vi­ous ver­sions and the ca­ble com­part­ment is now fully ac­ces­si­ble dur­ing assem­bly (the con­nec­tor in­sert is fully in­serted in the lower half of the en­clo­sure).

Of­fer­ing three times the space com­pared to stan­dard en­clo­sures. This means it is pos­si­ble to bend ca­bles and pipes with greater bending ra­diuses.

Due to this spe­cial fea­ture, the new BIG en­clo­sures are par­tic­u­larly suit­able for MIXO mod­u­lar in­serts, be­ing ver­sa­tile and cus­tomis­able for mul­ti­ple ca­ble en­tries.

Each in­sert is used to man­age power and sig­nal elec­tri­cal con­nec­tions, pneu­matic, fi­bre op­tic or Eth­er­net con­nec­tions and has a ded­i­cated en­try mean­ing it is now pos­si­ble to use one BIG con­nec­tor en­clo­sure for in­stal­la­tions that pre­vi­ously re­quired two.

The pos­si­bil­ity of split­ting the en­clo­sure in two halves sim­pli­fies the in­stal­la­tion of the in­sert.

It is also pos­si­ble to con­nect the in­sert with a ca­ble and later in­sert it in the lower half of the en­clo­sure (ex­cept for the six poles ver­sion).

www.demm.co.nz/reader-en­quiry #150735.

Newspapers in English

Newspapers from New Zealand

© PressReader. All rights reserved.