PBB20C-CPIEC Se­ries makes in­stal­la­tion and AC con­nec­tion easy

DEMM Engineering & Manufacturing - - ELECTRICAL TECHNOLOGY -

The PBB20C-CPIEC Se­ries of AC-DC con­vert­ers re­moves the need to have an elec­tri­cian in­stall the power sup­ply, as the PBB20C-CPIEC unit comes as a fin­ished so­lu­tion with the PSU mounted onto a L-Bracket plate and hard­wired into an IEC In­let. The IEC in­let cov­ers the mains part of the ter­mi­nal block pro­vid­ing ex­tra safety pre­vent­ing any­one from be­ing able to touch the AC mains sec­tion. The power sup­plies are sold with a right an­gled IEC power cord which pro­vides the in­staller with a very sim­ple plug in play so­lu­tion when it comes to the AC con­nec­tion. Avail­able from 75W through to 600W in out­put with a wide se­lec­tion of DC out­put volt­ages cov­er­ing 3.3V through to 56V. The base power sup­ply in this prod­uct is Ja­panese-made and comes with a man­u­fac­turer’s five-year war­ranty. The PBB20C-CPEIC units op­er­ate off a wide range 85-264V AC in­put range and are ap­proved to a range of in­ter­na­tional safety stan­dards in­clud­ing UL and cUL. The 75W to 150W mod­els are con­vec­tion cooled prod­ucts while the higher power 300W and 600W mod­els are fan cooled. Con­for­mal coat­ing is an op­tional ex­tra that can be added at the time of or­der­ing.

www.demm.co.nz/reader-en­quiry #150735a.

Newspapers in English

Newspapers from New Zealand

© PressReader. All rights reserved.