New FastMig X range for greater welding pro­duc­tiv­ity and qual­ity

DEMM Engineering & Manufacturing - - PRODUCT WATCH - DE­TAILS, MATT HERON, (022) 0200 626, E- MAIL MATT.HERON@KEMPPI.COM

Kemppi has un­veiled its new range of in­dus­trial welding equip­ment – the FastMig X se­ries – to help man­age­ment re­duce costs and im­prove pro­duc­tiv­ity.

The welding so­lu­tions are specif­i­cally de­signed for de­mand­ing and rig­or­ous in­dus­trial ap­pli­ca­tions; the FastMig X Reg­u­lar for gen­eral pur­pose heavy in­dus­trial fab­ri­ca­tion, FastMig X Pipe for FE and stain­less steel pipe welding ap­pli­ca­tions and FastMig X In­tel­li­gent for all met­als and pro­cesses in­clud­ing the welding of thin sheets.

All three mod­els can be up­graded and op­ti­mised for spe­cific pro­fes­sional welding ap­pli­ca­tions thanks to a range of op­tional soft­ware pack­ages and com­po­nents. The on­board arc op­ti­mi­sa­tion soft­ware em­pow­ers the welder and man­age­ment as it pro­vides greater flex­i­bil­ity and con­trol over the welding ma­chine to min­imise the need for re­work and in­crease pro­duc­tiv­ity.

Easy to use and set up, promised Kemppi, the FastMig X range is also highly ver­sa­tile. It lets you con­nect two wire feed­ers for a very rapid change in welding pro­cesses, and filler wire type and size, sav­ing time. Plus, when the Ar­cVolt­age fea­ture is en­abled, the FastMig X au­to­mat­i­cally dis­plays the ac­tual arc volt­age so that welding val­ues can re­main in­side the pre­de­fined range re­gard­less of the size and length of the ca­bles. This helps to re­duce the need for re­work and saves on time and costs.

FastMig X Reg­u­lar – De­liv­ers top qual­ity re­sults for in­dus­trial welding The FastMig X Reg­u­lar is de­signed for ba­sic pulse MIG welding, es­pe­cially for ro­bust metal plates and thick base ma­te­ri­als. It suits de­mand­ing welding tasks in in­dus­trial welding ap­pli­ca­tions at a work­shop or con­struc­tion site. In ad­di­tion to MIG/MAG and Syn­er­gic MIG welding pro­cesses, it also has pulsed and dou­ble-pulsed MIG as a stan­dard.

FastMig X Pipe – Five times faster root welding The FastMig X Pipe is spe­cially de­signed for pipe welding. It is also suit­able for plates and fast root welding from one side. It pro­duces an ex­cel­lent qual­ity weld, es­pe­cially when run­ning open gap root passes on pipes or plates with­out us­ing back­ing sup­port. WiseRoot+ is up to five times faster than TIG in root welding and three times faster than Syn­er­gic MIG. Highly re­li­able, the strong and pre­cise twin-mo­tor wire feed mech­a­nism en­sures a qual­ity welding re­sult in even the most de­mand­ing welding en­vi­ron­ments.

FastMig X In­tel­li­gent – For all met­als and pro­cesses The FastMig X In­tel­li­gent is suit­able for all high- end welding ap­pli­ca­tions, all met­als and pro­cesses, in­clud­ing the welding of thin sheets. It is per­fect for all de­mand­ing welding tasks in any in­dus­trial welding ap­pli­ca­tion at a work­shop, ship­yard or con­struc­tion site. The FastMig X In­tel­li­gent has a Du­raTorque DT wire feed mech­a­nism and a full pal­ette of welding pro­grams for var­i­ous pur­poses, filler wires and shield­ing gases to give the welder greater flex­i­bil­ity and con­trol over com­plet­ing dif­fer­ent welding tasks to a high stan­dard.

Ad­di­tion­ally, Arc Mo­bile Con­trol soft­ware for An­droid mo­bile de­vices can be used for easy mon­i­tor­ing, con­trol and ad­just­ment of welding pa­ram­e­ters and set­tings. Once set, the set­tings can be copy- pasted from one welding ma­chine to an­other.

Pow­er­ful, re­li­able and fea­ture rich, all three mod­els are equipped with ei­ther the FastMig X350 or the FastMig X450 power source which is a multi-process CC/CV power source that is ideal for syn­er­gic and pulsed MIG/MAG welding, MMA and TIG welding.

Newspapers in English

Newspapers from New Zealand

© PressReader. All rights reserved.