Rugged and ac­cu­rate

DEMM Engineering & Manufacturing - - PRODUCT WATCH - DE­TAILS, PH: 09 526 0096 EMAIL: SALES@INSTRUMATICS.CO.NZ. WWW.INSTRUMATICS.CO.NZ

Isotech’s Quick Cal range of testers are ide­ally suited to op­er­a­tors that re­quire a rugged, ac­cu­rate dry- block cal­i­bra­tor for on-site op­er­a­tions. Two op­tions are avail­able for vary­ing tem­per­a­ture ranges: The Low Tem­per­a­ture Quick Cal cov­ers the tem­per­a­ture range of -12°C to +140°C, mak­ing it ideal for the med­i­cal, ster­il­i­sa­tion and food in­dus­tries; The High Tem­per­a­ture Quick Cal cov­ers the tem­per­a­ture range from 30°C to 350°C.

Both have in­ter­change­able in­serts, so you don’t need to buy an­other cal­i­bra­tor each time you find a new di­am­e­ter sen­sor to cal­i­brate. The Low Tem­per­a­ture Quick Cal is par­tic­u­larly ex­cit­ing as it op­er­ates from a small 12- volt bat­tery, mak­ing it truly por­ta­ble. Al­ter­na­tively, a mains sup­ply is avail­able with 100V - 240V, 50/60Hz in­put.

The Low Tem­per­a­ture Quick Cal in­cludes two in­serts: one blank and the other drilled 6.8mm di­am­e­ter at 120mm deep. Clients have the op­tion to or­der pre-drilled in­serts to suit needs as re­quired. Each cal­i­bra­tion well is 13mm di­am­e­ter and 120mm deep.

The High Tem­per­a­ture Quick Cal has a sin­gle larger well and in­ter­change­able in­serts: 25mm in di­am­e­ter by 120mm deep. Blank and other special drillings are avail­able to or­der. The High Tem­per­a­ture Quick Cal is sup­plied 100-130 or 200-250V AC, 50/60Hz.

A range of ac­ces­sories are avail­able, in­clud­ing: A cus­tomised carry case; cus­tom-made in­serts and a recharge­able bat­tery (for the Low Tem­per­a­ture Quick Cal).

Newspapers in English

Newspapers from New Zealand

© PressReader. All rights reserved.