MA­TE­RI­ALS

NZ Gardener - - Diy Project -

You will need • 16m of 150mm x 25mm H3 dressed pine • 18m of 75mm x 25mm H3 dressed pine • 6m of 50mm x 50mm H3 dressed pine • 8g x 50mm screws

• Screw­driver with long and stan­dard screw­driver bit • Coun­ter­sink bit

• Drop saw • Jig­saw • Clamps • San­der/ sand­pa­per • Tape mea­sure and pen­cil

• Wood filler • Sta­pler • Scis­sors • 3000mm x 2000mm black poly­thene or pond liner

• 100mm x 1600mm weed­mat • 110mm drainage pipe (per­fo­rated) 3 x 1360mm

• 110mm x 5m fil­ter sleeve • Small length of 6mm clear vinyl tube and drill bit

• Gar­den hose off-cut ap­prox. 30cm plus hose at­tach­ment • Re­sene Quick Dry Primer and test pots • brushes or small roller • mask­ing tape

Cut­ting list: • From the 150mm x 25mm: Ends - 8 x 600mm; and Sides - 8 x 1400mm

• From the 50mm x 50mm: Posts - 12 x 540mm • From the 75mm x 25mm: Floor – 8 x 1360mm; Joists - 5 x 600; and Cap­ping – 2 x 1400mm & 2 x 600mm

Cost: $365 ex­clud­ing paint, pot­ting mix and plants

Newspapers in English

Newspapers from New Zealand

© PressReader. All rights reserved.