Get started...

Home (South Africa) - - DO IT YOURSELF -

Trace the base and top of the bucket on the chip­board, and cut it out a lit­tle smaller than the traced line (by about 8mm) with the jig­saw. Ar­range the three legs around the edge of the smaller round of chip­board (make sure they’re evenly spaced) and se­cure in po­si­tion with the longer screws. Place the bucket over the chip­board with the legs and screw in place. You will have to drill holes to do so. Cut the bat­ting about 120mm big­ger than the re­main­ing chip­board round on all sides. Place a big ball of cush­ion stuff­ing in the cen­tre of the bat­ting and po­si­tion the chip­board on top. Fold the bat­ting back over the chip­board and sta­ple in place. Place the padded seat on the fab­ric; cut the fab­ric about 100mm big­ger on all sides, fold the fab­ric back over the chip­board and sta­ple in place. Place the seat in the open­ing at the top of the bucket. >>

1

6

2

5

3

4 Cush­ion stuff­ing

Newspapers in English

Newspapers from South Africa

© PressReader. All rights reserved.