Surprise your Valentine with flowers in a display stand made with love!
You will need
• 22mm x 95mm planed pine, cut to: two 600mm lengths two 195mm lengths • 6mm x 40mm chipboard screws • Alcolin Cold Glue • Alcolin Woodfiller • 120-grit sandpaper • 6 vases or bottles
1 Drill six equally-spaced 32mm holes through one of the 600mm planks.
2 Using Alcolin Cold Glue, glue and screw the two 195mm planks between the ends of the two 600mm planks. Fill the screw holes with Alcolin Woodfiller, allow to dry and sand thoroughly.
3 Place the bottles in the stand with their necks through the individual holes (then hide it away until the 14th when it’s time to add the Valentine’s flowers...).