Power-tec Parking Sensor Hole Cutter Set
Fitting aftermarket parking sensors or refitting them after accident damage is made much simpler using this precision hole cutter set (part number 92489). It lets you cut dimensionally-accurate holes cleanly and quickly: drill the pilot hole in the new panel using the 5/16 in HSS drillbit, then choose the correct combination of die and cutter punch from the set of 10 hole sizes included.
Assemble with the die behind the panel and the cutter punch on the outer face, then tighten the nut on the force screw with a 12mm socket until the hole is cut, leaving a clean-finished edge on the outer surface of the panel. Up to 5mm plastic can be cut and the following hole sizes are accommodated in the set: 32mm, 26.7mm, 26mm, 24mm, 22.5mm, 20mm, 19mm, 18.2mm, 18mm and 17mm.
The Power-tec Parking Sensor Hole Cutter Set is priced at £132.48.
Full details from www.power-tec.co.uk