Drink to a spe­cial birth­day boy with three cards

Cel­e­brate a spe­cial gent’s birth­day with Hazel France’s three – hic! – card de­signs

Cardmaking and Papercraft - - Contents -

Happy birth­day

1 Round the cor­ners of a 148mm square white base card and the cor­ners of a 124mm square of pat­terned pa­per. At­tach brown brads to cor­ners. Layer onto a 144mm square of wood-ef­fect pa­per with rounded cor­ners and add to base. 2 Die-cut a cir­cle from pat­terned pa­per and at­tach to cen­tre of base. Use nest­ing cir­cle dies to die-cut a cir­cu­lar frame from wood-ef­fect pa­per. At­tach a die-cut cir­cle of ac­etate to re­verse of frame. Ap­ply foam tape to re­verse of frame. 3 Die-cut lots of small cir­cles from coloured card. Layer onto white cir­cles and black scal­loped cir­cles to re­sem­ble bot­tle tops as shown. Place cir­cles onto cen­tre of base and place frame on top to cre­ate a shaker panel. 4 Stamp ban­ner out­line and sen­ti­ment onto white card in black and die-cut us­ing co­or­di­nat­ing die. Add to cen­tre of base to fin­ish.

It’s your birth­day!

1 Use a cor­ner rounder punch to round the cor­ners of a 148mm square white base card. Round the cor­ners of a 144mm square of black card and add to the base. 2 Round the cor­ners of 140mm square of white card. Stamp dif­fer­ent im­ages in black to cover the panel as shown and colour us­ing al­co­hol mark­ers. At­tach to the base. 3 Round the cor­ners of an 80mm square of black card. Stamp a sen­ti­ment onto the top of the panel us­ing Ver­saMark ink, ap­ply white em­boss­ing pow­der and heat to set. Add the panel to the base with sticky fix­ers. 4 Stamp sev­eral im­ages onto white card in black and colour us­ing al­co­hol mark­ers. Die-cut the im­ages us­ing the co­or­di­nat­ing dies and at­tach to the cen­tre of the base with sticky fix­ers as shown.

On your birth­day!

1 Trans­fer the bot­tle base tem­plate from p93 onto Kraft card and cut out. Ap­ply brown ink around the edges. Score and fold in half to cre­ate the base. 2 Trim a cork shape from Kraft card. Ink the edges in brown and at­tach to the top of the bot­tle as shown. Trans­fer the bot­tle tem­plate from p93 onto pat­terned pa­per and cut out. Ink the edges in brown and at­tach to the base. 3 Print a sen­ti­ment onto Kraft card and die-cut into a la­bel shape. Ink the edges in brown, layer onto black card and add to the base. Die-cut a small la­bel from gold pa­per, layer onto black card and add to the bot­tom of the sen­ti­ment la­bel. 4 Trim a chevron shape from gold pa­per and at­tach to the neck of the bot­tle. Trim two short strips of Kraft card and at­tach to the top of the base as shown. If de­sired, print the re­cip­i­ent’s age onto Kraft card and die-cut into a la­bel shape. Ink the edges in brown,

layer onto black card and add to the base.

Newspapers in English

Newspapers from UK

© PressReader. All rights reserved.