Beall Pullover

Knit­ted in smooth, sim­ple re­verse stock­inette with just enough cable de­tail on the sleeves and bor­ders, this pullover will be­come a wardrobe sta­ple.

Creative Knitting - - CONTENTS - De­sign by Melissa Leap­man

Sizes

Woman’s small (medium, large, X-large, 2X-large) In­struc­tions are given for smallest size, with larger sizes in paren­the­ses. When only 1 num­ber is given, it ap­plies to all sizes.

Fin­ished Mea­sure­ments

Chest: 34 (38, 421/2, 46, 50) inches Length: 24 (241/2, 25, 251/2, 26) inches

Ma­te­ri­als

• King Cole Fash­ion Aran (worsted weight; 70% acrylic/30% wool; 219 yds/ 100g per ball): 6 (6, 7, 8, 8) balls bil­berry #1817 • Size 6 (4mm) straight and 16-inch

cir­cu­lar nee­dles • Size 7 (4.5mm) nee­dles or size

needed to ob­tain gauge • Cable nee­dle • Stitch mark­ers

Gauge

18 sts and 26 rows = 4 inches/10cm in rev St st with larger nee­dles, blocked. To save time, take time to check gauge.

Spe­cial Ab­bre­vi­a­tions

2 over 2 Right Cross (2/2 RC): Sl 2 to cn and hold in back; k2, k2 from cn. 2 over 2 Left Cross (2/2 LC): Sl 2 to cn and hold in front; k2, k2 from cn. 2 over 2 Left Purl Cross (2/2 LPC): Sl 2 to cn and hold in front; p2, k2 from cn. 2 over 2 Right Purl Cross (2/2 RPC): Sl 2 to cn and hold in back; k2, p2 from cn. Make 1 Purl­wise (M1-P): Insert LH nee­dle from front to back un­der hor­i­zon­tal strand be­tween last st worked and next st on LH nee­dle; purl through back of re­sult­ing loop. Slip, slip, purl (ssp): Sl 2 sts 1 at a time kwise to RH nee­dle; re­turn sts to LH nee­dle in turned po­si­tion and p2­tog-tbl—a left-lean­ing sin­gle dec.

Pat­tern Stitches

Cable Rib (worked flat; mul­ti­ple of 8 sts) Row 1 (RS): *P2, k4, p2; rep from * to end. Row 2: *K2, p4, k2; rep from * to end. Row 3: *P2, 2/2 RC, p2; rep from * to end. Row 4: Rep Row 2.

Rep Rows 1–4 for pat. Cable Rib (worked in the rnd; mul­ti­ple of 8 sts) Rnds 1 and 2: *P2, k4, p2; rep from * around. Rnd 3: *P2, 2/2 RC, p2; rep from * around. Rnd 4: Rep Rnd 2.

Rep Rnds 1–4 for pat. Cable Panel (40-st panel) Note: A chart is pro­vided for those pre­fer­ring to work pat st from a chart. Row 1 (RS): P16, 2/2 RC, 2/2 LC, p16. Row 2 (WS): K16, p8, k16. Row 3: P14, 2/2 RPC, 2/2 RC, 2/2 LPC, p14. Row 4: K14, p2, k2, p4, k2, p2, k14. Row 5: P12, 2/2 RPC 2 times, 2/2 LPC 2 times, p12. Row 6: K12, [p2, k2] 2 times, [k2, p2] 2 times, k12. Row 7: P10, 2/2 RPC, p2, k2, p4, k2, p2, 2/2 LPC, p10. Row 8: K10, p2, [k4, p2] 3 times, k10. Row 9: P8, 2/2 RC, p4, [k2, p4] twice, 2/2 LC, p8. Row 10: K8, p4, k4, [p2, k4] twice, p4, k8. Row 11: P6, 2/2 RPC, 2/2 LPC, [p2, 2/2 RPC, 2/2 LPC] twice, p6. Row 12: K6, [p2, k4] twice, p4, [k4, p2] twice, k6. Row 13: P6, [k2, p4] twice, 2/2 RC, [p4, k2] twice, p6. Row 14: Rep Row 12. Row 15: P6, [k2, p4] twice, k4, [p4, k2] twice, p6. Row 16: Rep Row 12. Row 17: P6, 2/2 LPC, 2/2 RPC, p4, 2/2 RC, p4, 2/2 LPC, 2/2 RPC, p6. Row 18: K8, p4, [k6, p4] twice, k8. Row 19: P8, 2/2 LC, p6, k4, p6, 2/2 RC, p8. Row 20: K8, p4, [k6, p4] twice, k8. Row 21: P6, 2/2 RPC, 2/2 LPC, p4, 2/2 RC, p4, 2/2 RPC, 2/2 LPC, p6. Row 22: K6, [p2, k4] twice, p4, [k2, p4] twice, k6. Row 23: P4, 2/2 RPC, p4, 2/2 LPC, p2, k4, p2, 2/2 RPC, p4, 2/2 LPC, p4. Row 24: K4, p2, k8, p2, k2, p4, k2, p2, k8, p2, k4. Row 25: P2, 2/2 RPC, p8, 2/2 LPC, 2/2 RC, 2/2 RPC, p8, 2/2 LPC, p2. Row 26: K2, p2, k12, p8, k12, p2, k2. Row 27: 2/2 RPC, p12, 2/2 LPC, 2/2 RPC, p12, 2/2 LPC. Row 28: P2, k16, p4, k16, p2. Row 29: K2, p16, 2/2 RC, p16, k2. Row 30: Rep Row 28. Row 31: [2/2 LPC, p12, 2/2 RPC] twice. Row 32: K2, p2, k12, p2, k4, p2, k12, p2, k2. Row 33: P2, 2/2 LPC, p8, 2/2 RPC, p4, 2/2 LPC, p8, 2/2 RPC, p2. Row 34: K4, p2, [k8, p2] 3 times, k4. Row 35: P4, 2/2 LPC, p4, 2/2 RPC, p8, 2/2 LPC, p4, 2/2 RPC, p4. Row 36: K6, p2, k4, p2, k12, p2, k4, p2, k6. Row 37: P6, 2/2 LPC, 2/2 RPC, p2, 2/2 LPC, 2/2 RPC, p6. Row 38: K8, p4, k16, p4, k8. Row 39: P8, 2/2 LPC, p16, 2/2 RPC, p8. Row 40: K10, p2, k16, p2, k10. Row 41: P10, 2/2 LPC, p12, 2/2 RPC, p10. Row 42: K12, [p2, k12] 2 times. Row 43: P12, 2/2 LPC, p8, 2/2 RPC, p12. Row 44: K14, p2, k8, p2, k14. Row 45: P14, 2/2 LPC, p4, 2/2 RPC, p14. Row 46: K16, p2, k4, p2, k16. Row 47: P16, 2/2 LPC, 2/2 RPC, p16. Row 48: K18, p4, k18. Row 49: P18, 2/2 RC, p18. Row 50: Knit.

Pat­tern Notes

Pullover is worked in pieces from the bot­tom up, then seamed.

Work de­creases as fol­lows: On right­side rows, work [p1, p2­tog] at be­gin­ning of row and [ssp, p1] at end; on wrong-side rows, work [k1, ssk] at be­gin­ning of row and [k2­tog, k1] at end.

When in­creas­ing, work [p1, M1-P] at be­gin­ning of row and [M1-P, p1] at end.

Back

Bor­der With smaller nee­dle, cast on 76 (86, 96, 104, 112) sts. Setup Row (RS): P2 (3, 0, 0, 0) (edge sts), work Cabled Rib to last 2 (3, 0, 0, 0) sts, p2 (3, 0, 0, 0) edge sts.

Work­ing edge sts in rev St st and all other sts in 4-row Cabled Rib pat, work even un­til piece mea­sures ap­prox 21/2 inches, end­ing with Row 4.

Body Change to larger nee­dles and rev St st across all sts.

Work even un­til piece mea­sures ap­prox 151/2 inches, end­ing with a WS row. Shape Arm­holes Bind off 3 (3, 3, 4, 4) sts at beg of next 2 rows and 2 (2, 2, 2, 3) sts at beg of fol­low­ing 2 rows—66 (76, 86, 92, 98) sts.

Dec 1 st each side on next row, then [ev­ery RS row] 0 (2, 4, 5, 7) times and [ev­ery 4 rows] 0 (1, 2, 3, 3) time(s)— 64 (68, 72, 74, 76) sts.

Work even un­til arm­holes mea­sure 61/4 (63/4, 71/4, 73/4, 81/4) inches, end­ing with a WS row. Shape Shoul­ders Bind off 5 (6, 7, 7, 7) sts at beg of next 4 rows and 6 (6, 6, 7, 8) sts at beg of fol­low­ing 2 rows.

Bind off rem 32 sts.

Front

Work same as for back un­til arm­holes mea­sure 51/4 (53/4, 61/4, 63/4, 71/4) inches, end­ing with a WS row. Shape Neck & Shoul­ders Divi­sion Row (RS): P25 (27, 29, 30, 31) sts; join 2nd ball of yarn and bind off cen­ter 14 sts; purl to end of row— 25 (27, 29, 30, 31) sts each side.

Work­ing both sides at once with sep­a­rate balls of yarn, bind off 4 sts at each neck edge once then 2 sts at each neck edge once—19 (21, 23, 24, 25) sts each side.

Dec 1 st at each neck edge [ev­ery row] 3 times—16 (18, 20, 21, 22) sts rem each side.

At the same time, when arm­holes mea­sure same as for back, shape shoul­ders as for back.

Sleeve

Cuff With smaller nee­dles, cast on 44 sts. Setup Row (RS): P2 (edge sts), work Cable Rib to last 2 sts, p2 (edge sts).

Work­ing edge sts in rev St st and all other sts in 4-row Cabled Rib, work even un­til piece mea­sures 21/2 inches, end­ing with Row 4.

Body Change to larger nee­dles. Setup Row (RS): P2, pm, work Row 1 of Cable Panel across 40 sts, pm, p2.

Work­ing 40 sts be­tween mark­ers in Cable Panel pat and sts on ei­ther side in rev St st, inc 1 st each side [ev­ery 12 (8, 6, 6, 4) rows] 7 (1, 3, 11, 2) time(s) and [ev­ery 14 (10, 8, 8, 6) rows] 1 (9, 10, 4, 15) time(s)—60 (64, 70, 74, 78) sts.

At the same time, af­ter Cable Panel is com­plete, work all sts in rev St st to end of sleeve.

Work even un­til piece mea­sures ap­prox 181/2 inches, end­ing with a WS row. Shape Cap Bind off 3 (3, 3, 4, 4) sts at beg of next 2 rows—54 (58, 64, 66, 70) sts.

Dec 1 st each side [ev­ery RS row] 15 (17, 17, 19, 17) times, then [ev­ery row] 2 (2, 5, 4, 8) times—20 sts.

Bind off 2 sts at beg of next 4 rows—12 sts. Sad­dle Work even on rem sts un­til the sad­dle mea­sures, when slightly stretched, same as 1 shoul­der edge or just a bit short of 31/2 (4, 41/2, 43/4, 5) inches.

Bind off.

Fin­ish­ing

Weave in ends. Block pieces to mea­sure­ments. Sew sad­dles be­tween shoul­ders. Set in sleeves. Sew sleeve and side seams. Neck­band With cir­cu­lar nee­dle, pick up and knit 80 sts around neck; pm for beg of rnd and join.

Work Cable Rib un­til neck­band mea­sures ap­prox 4 inches, end­ing with Rnd 4.

Bind off in pat.

Newspapers in English

Newspapers from USA

© PressReader. All rights reserved.