Sand Dol­lars

Crochet World - - Marvelous Crochet Motifs - De­sign by Agnes Rus­sell

FIN­ISHED MEA­SURE­MENT

12 inches x 31 inches

MA­TE­RI­ALS

• Aunt Ly­dia’s Clas­sic Cro­chet size 10 cro­chet cot­ton (400 yds per ball):

3 balls #226 nat­u­ral • Size 7/1.65mm steel cro­chet hook or size needed to ob­tain gauge • Ta­pes­try nee­dle • Safety pin

GAUGE

Mo­tif = 4 inches

PAT­TERN NOTES

Weave in loose ends as work pro­gresses. Join rounds with slip stitch un­less oth­er­wise stated. Each Mo­tif re­quires 34 yards of cot­ton. Chain-3 at be­gin­ning of rounds counts as first dou­ble cro­chet un­less oth­er­wise stated.

SPE­CIAL STITCH

Shell: (2 dc, ch 3, 2 dc) in in­di­cated sp.

MO­TIF

Make 19.

Rnd 1: Leav­ing 1-inch length at beg, ch 6, join (see Pat­tern Notes) in 6th ch from hook to form ring, hold beg length be­hind ring and work­ing over beg length un­til gone, ch 1, 12 sc in ring, join in beg sc. Rnd 2: Ch 1, 2 sc in each sc around, join in first sc, draw up lp, re­move hook. Place safety pin in back lp (see Stitch Guide) of first sc of rnd 2, pick up dropped lp. (24 sc) Rnd 3: Work­ing in front lps (see

Stitch Color Guide),speci cations: ch 1, sc in first sc, An­nie’s Logo Pur­ple: [ch 12, Pan­tone: sc 268C, in GOE Medium eachPur­ple U of next 4 sc] 5 CMYK: C82, M100, K12 RGB: R82, G43, B133 times, Hex­adec­i­mal:ch 12,522b85 sc in each of next 3 sc, An­nie’s Logo Gray: join in Pan­tone: begCool Gray sc.9 U (6 ch-12 sps, 24 sc) CMYK: 60K RGB: R130, G131, B134 Hex­adec­i­mal: 828386

Rnd 4: Ch 1, [(8 sc, ch 3, 8 sc) in next ch-12 sp, sk next sc of rnd 3, sc in each of next 2 sc, sk next sc of rnd 3] 6 times, join in first sc.

Rnd 5: Ch 1, [sc in each of next 8 sc, (sc, ch 3, sc) in next ch-3 sp, sc in each of next 8 sc, sk next 2 sc] 6 times. Fas­ten off.

Rnd 6: Work­ing in back lps of rnd 2, join cot­ton in st marked with safety pin, re­move pin, ch 1, sc in same st as beg ch-1, sc in each of next 23 sts, join in beg sc. (24 sc)

Rnd 7: Ch 1, sc in same sc, ch 3, [sc in next sc, ch 3] around, join in beg sc. (24 sc, 24 ch-3 sps) Rnd 8: Sl st in next ch-3 sp, ch 1, (sc, ch 3, sc) in same ch-3 sp as beg ch-1, (sc, ch 3, sc) in each rem ch-3 sp around, join in beg sc.

Rnd 9: Sl st in next ch-3 sp, ch 1, sc in same ch-3 sp as beg ch-1, ch 4, [sc in next ch-3 sp, ch 4] around, join in beg sc.

Rnd 10: Sl st in next ch-4 sp, ch 1, (sc, ch 4, sc) in same ch-4 sp as beg ch-1, (sc, ch 4, sc) in each rem ch-4 sp around, join in beg sc. Note: For ease in join­ing, if rnd 5 seems twisted slightly, lightly steam-press piece flat. Rnd 11: Sl st in next ch-4 sp, *hold­ing rnds 5 and 10 tog, work­ing through both thick­nesses of ch-3 sp of rnd 5 and ch-4 sp of rnd 10, ch 1, (sc, ch 4, sc) in both sps, ch 2, [work­ing in ch-4 sp of rnd 10 only, (sc, ch 4, sc) in next ch-4 sp, ch 2] 3 times, rep from * around, join in beg sc.

Rnd 12: Sl st in next ch-4 sp, ( ch 3— see Pat­tern Notes, dc, ch 3, 2 dc) in same ch-4 sp as first sl st, sc in next ch-2 sp, [ shell (see Spe

cial Stitch) in next ch-4 sp, sc in next ch-2 sp] around, join in 3rd ch of beg ch-3. Fas­ten off. Note: Shells are aligned di­rectly above 6 joined points.

1-POINT MO­TIF JOIN

Rnds 1–11: Rep rnds 1–11 of First Mo­tif.

Rnd 12: Sl st in next ch-4 sp, (ch 3, dc, ch 3, 2 dc) in same ch-4 sp as first sl st, sc in next ch-2 sp, [shell in next ch-4 sp, sc in next ch-2 sp] 3 times, 2 dc in next join­ing ch-4 sp of rnd 11, ch 1, sl st in ad­ja­cent ch-3 sp on pre­vi­ous Mo­tif, ch 1, 2 dc in same ch-4 sp on cur­rent Mo­tif, sc in next ch-2 sp, [shell in next ch-4 sp, sc in next ch-2 sp] around, join in top of beg ch-3. Fas­ten off.

2-POINT MO­TIF JOIN

Rnds 1–11: Rep rnds 1–11 of First Mo­tif.

Rnd 12: Sl st in next ch-4 sp, (ch 3, dc, ch 3, 2 dc) in same ch-4 sp, sc in next ch-2 sp, *[shell in next ch-4 sp, sc in next ch-2 sp] 3 times, 2 dc in next join­ing ch-4 sp of rnd 11, ch 1, sl st in ad­ja­cent ch-3 sp on pre­vi­ous Mo­tif, ch 1, 2 dc in same ch-4 sp on work­ing Mo­tif, sc in next ch-2 sp*, rep from * to * once, [shell in next ch-4 sp, sc in next ch-2 sp] around, join in beg ch-3. Fas­ten off.

3-POINT MO­TIF JOIN

Rnds 1–11: Rep rnds 1–11 of First Mo­tif.

Rnd 12 (join­ing rnd): Sl st in next ch-4 sp, (ch 3, dc, ch 3, 2 dc) in same ch-4 sp, sc in next ch-2 sp, *[shell in next ch-4 sp, sc in

next ch-2 sp] 3 times, 2 dc in next join­ing ch-4 sp of rnd 11, ch 1, sl st in ad­ja­cent ch-3 sp on pre­vi­ous Mo­tif, ch 1, 2 dc in same ch-4 sp on work­ing Mo­tif, sc in next ch-2 sp*, rep from * to * twice, [shell in next ch-4 sp, sc in next ch-2 sp] around, join in beg ch-3. Fas­ten off.

AS­SEM­BLY

Work Mo­tifs as shown in As­sem­bly Di­a­gram. When work­ing join­ing rnd, make sure that join­ing is worked ad­ja­cent to the ch-4 join on pre­vi­ous Mo­tif.

Bor­der

Rnd 1: Join cot­ton in first un­worked ch-3 sp on end Mo­tif, ch 1, (sc, ch 5, sc) in same ch-3 sp as beg ch-1, ch 2, [(sc, ch 5, sc) in next un­worked ch-3 sp, ch 2] around, do not work in joined shells, join in beg sc.

Rnd 2: Sl st in next ch-5 sp, ch 1, (2 sc, ch 3, sc, ch 3, 2 sc) in same ch-5 sp as beg ch-1, sc in next ch-2 sp, [(2 sc, ch 3, sc, ch 3, 2 sc) in next ch-5 sp, sc in next ch-2 sp] around, join in beg sc. Fas­ten off.

Newspapers in English

Newspapers from USA

© PressReader. All rights reserved.