MONTHLY PAINT TIP
THE PREMIER PRIMER PROJECT SURFACER LE3004S 2K BY THE PAINT FOLKS
For all you painters out there who spray from a high-tech facility or your high-tech backyard garage, this Axalta Paint Tip of the month is for you! All paint projects should hopefully begin from the bare metal on up, my friends. What good is it if you spend hundreds of manhours on a custom paintjob and the foundation wasn’t prepared or sealed right? In due time all your labor and materials will be coming right back up on you, and you don’t want to start all over again. This is why we recommend when you strip or sandblast a frame or body of a project, you start off next by spraying Axalta’s low-VOC Etching Primer 22880S Chroma Premier. This will provide you with an excellent corrosion resistance and adhesion sealer for all things that start with bare metal. Let it flash off for about 20 minutes. Then all you will need is to spray the project vehicle with LE3004S 2K Primer Surfacer. Spray three to four coats for the foundation that will last the lifetime of the vehicle, making it worth putting all those manhours and materials, especially the continuous coats of colors that will follow on your painting project.
For any and all technical paint advice, please contact Axalta Product Specialist Steven Chaparro at email@example.com.