Pick a Bouquet Raw-Edge Fusible Appliqué 5. One of the easiest ways to appliqué is the raw-edge fusible- web method. Paper-backed fusible web individual pieces are fused to the wrong side of specified fabrics, cut out and then fused together in a motif or individually to a foundation fabric, where they are machine-stitched in place. Again following fusible web manufacturer’s instructions, arrange and fuse pieces to quilt referring to quilt pattern. Or fuse together shapes on top of an appliqué ironing mat to make an appliqué motif that can then be fused to the quilt. STITCHING APPLIQUÉ EDGES Machine-stitch appliqué edges to secure the appliqués in place and help finish the raw edges with matching or invisible thread (Photo 1). CHOOSING APPLIQUÉ FABRICS Photo 2 Depending on the appliqué, you may want to consider using batiks. Batik is a much tighter weave and, because of the manufacturing process, does not fray. If you are thinking about using regular quilting cottons, be sure to stitch your raw-edge appliqués with blanket/buttonhole stitches instead of a straight stitch. Practice turning inside and outside corners on scrap fabric before stitching appliqué pieces. Learn how your machine stitches so that you can make the pivot points smooth. To stitch outer corners, stitch to the edge of the corner and stop with needle in the fabric at the corner point. Pivot to the next side of the corner and continue to sew (Photo 3). You will get a box on an outside corner. Note: To show stitching, all samples have been stitched with contrasting thread. 1. Straight stitch Buttonhole or blanket stitch CUTTING APPLIQUÉ PIECES 1. Fusible appliqué shapes should be reversed for this technique. Trace the appliqué shapes onto the paper side of paper-backed fusible web. Leave at least 1/4" between shapes. Cut out shapes leaving a margin around traced lines. 2. Photo 1 Photo 3 2. Invisible thread can be used to stitch appliqués down when using the blanket or straight stitches. Do not use it for the satin stitch. Definitely practice with invisible thread before using it on your quilt; it can sometimes be difficult to work with. A short, narrow buttonhole or blanket stitch is most commonly used (Photo 2). Your machine manual may also refer to this as an appliqué stitch. Be sure to stitch next to the appliqué edge with the stitch catching the appliqué. To stitch inner corners, pivot at the inner point with needle in fabric (Photo 4). You will see a Y shape in the corner. Note: If doing several identical appliqués, trace reversed shapes onto template material to make reusable templates for tracing shapes onto the fusible web. Pivot point 3. Follow manufacturer’s instructions and fuse shapes to wrong side of fabric as indicated on pattern for color and number to cut. Cut out appliqué shapes on traced lines. Remove paper backing from shapes. 4. Photo 4 12 Springtime Quilts QUILTER’S WORLD PRESENTS: Mayy 2019
© PressReader. All rights reserved.