Cut out the parts
After adjusting the size of parts B, C, D and E for the cabinet width, you can cut out all the parts except the carrier bottom. If you’re using a table saw, make partial cuts to form the L-shaped sides. But remember, you can’t see how far the blade is cutting on the underside, so be sure to stop short of your inside corner marks by at least an inch. shows how to complete the cut with a jigsaw.
Trace along the edge of a 1-gallon paint can to draw the radius for the curve on the side panels. Trace along a quartsize can to draw the radius on the dividers. Cut the curves on the sides and dividers with a jigsaw Smooth the curved cuts with 100-grit sandpaper.
Photo 2 (Photo 3).