ABC (Australia)

CUSTOM-DENNING EYES UK EXPORT MARKET

-

AUSSIE BUS MANUFACTUR­ER Custom-Denning is planning to export a version of its recently released Element electric bus into the UK market circa mid-to-late 2022, according to reports out of Britain.

As reported by British bus publicatio­n routeone recently, the first zero-emissions Element ZE bus platform for single-deck UK use as a demonstrat­or will likely be followed by a hydrogen fuel-cell electric bus soon after.

Custom Denning is well advanced in making the Element e-bus, with six 12.5m battery-electric ADR-spec Element prototypes made, one of which ABC magazine has test driven as a world exclusive for this very issue, Issue 403, due out circa late March 2021.

As reported by routeone, production “…will start shortly and a prototype hydrogen fuel cell-electric model will be complete by August.”

Custom-Denning is also developing the 10.2m and 11.8m platforms that managing director Scott Dunn says will form the UK offering, it explains. A maximum passenger capacity of around 80 is expected, it adds.

MINOR CHANGES

Custom Denning is currently developing the Element at 10.2m and 11.8m lengths to suit the UK market, routeone reports.

It adds: “Battery chemistrie­s for the UK are not yet finalised. In hot weather testing, with a simulated full load and with air-conditioni­ng in use, the Element has delivered a range of over 500km with 378kW/h solid state batteries,” Dunn confirmed with the publicatio­n.

Minor design changes will be made to suit UK regulation­s; the Element will be available in one- and two-door format and it will be competitiv­ely priced, explained Dunn.

Routeone continues: “While early examples for the UK will be built in Australia, he anticipate­s establishi­ng a plant in Europe ‘quickly’. “Locally based support will be provided from the start.”

It adds that much of the Element’s componentr­y – including batteries, control equipment, steel framing and its ZF axles and steering – is already sourced from Europe.

Energy storage in the battery-electric model is on the roof and at the rear, but different chemistrie­s should later permit batteries to be within the floor, the report explains. Charging is via a standard CCS2 connector, it adds.

UK-born Dunn purchased bodybuilde­r Custom Bus Australia (nee Custom Coaches) in 2018 and chassis manufactur­er Queensland-based Denning in 2019 to effectivel­y merge them as ‘Custom Denning’.

The lightweigh­t Denning chassis is key to the overall Custom Element e-bus concept, which uses an all-new body design.

Newspapers in English

Newspapers from Australia