Australian How to Paint

The Scratchboa­rd Panther

- By Rikki Fisher

With skillful scratching and diluted ink layering, this artist has created an amazingly detailed panther portrait.

MATERIALS

• Reference photo

• Cotton gloves

• Biro

• White carbon paper

• Fiberglass brush

• Very fine steel wool

• Scratch knife – curved edge

• Scratch knife – straight edge

• Ampersand scratchboa­rd

• Watercolou­r brush or airbrush

• Black ink – Art Spectrum or similar

• Fixative

Scratchboa­rd. What is it? Scratchboa­rd is a board with a thin clay coating covered with black ink. A scratch tool is used to scratch through the layer of black ink revealing the white clay underneath. You can buy board that is pre-inked, called scratchboa­rd, or un-inked, called clayboard. There are also boards that are coloured beneath the black ink.

You can use a variety of tools, basically anything that scratches. Nibs, steel wool, fiberglass brushes, emery boards and tattoo needles all have their uses.

The main tool of trade for most scratchboa­rders is a fine nib like a No. 11 exacto blade. Once a layer is scratched, diluted ink is layered over the artwork by brush and rescratche­d to create tone and form. This process of scratching and layering diluted ink is repeated until you build up the tonal range you want.

I prefer to use a fiberglass brush as I have found it is similar to using a graphite pencil. As I vary the pressure on the tool I get some tonal range. When it comes to layering to create form and tone, I use an airbrush as I have found it gives me a softer, smoother gradation quickly. ‘Quick’ is the motivating word for me as scratching can be a slow, painstakin­g process. On the other hand it is a very forgiving medium, if you make a mistake you can just cover over the section with black ink and redo it.

When rendering animals, a fiberglass brush is a great tool to replicate fur, whilst a No.11 Exacto blade, a nib or a tattoo needle is useful when rendering human, primate or reptilian skin.

STEP ONE

Using your finished drawing (or photo), make a tracing of the outline. Tape the traced line drawing to the top of the scratchboa­rd. Slip carbon paper between the line drawing and board. Using a Biro, outline the image onto the board. To minimize marks on the board wear a cotton glove.

Using the fiberglass brush, I start with the eye. Use short, light strokes. Remember that the iris is round, therefore curve your stokes accordingl­y.

STEP TWO

From the eye, I move to the area

surroundin­g the eye. When scratching, keep the pressure to a minimum; you shouldn’t be able to feel any grooves.

STEP THREE

Using your photo reference, observe the varied lengths and direction of the panther’s fur. The hair on the nose is made with short strokes, while the fur around the cheek is made with longer strokes. To create realistic fur, don’t make your strokes too uniform.

STEP FOUR

Using a nib with a curved edge, scrape off ink about 5mm around the panther’s face. Now using fine steel wool, with a circular motion scratch out more of the background.

STEP FIVE

Once you have scratched all the areas, use a watercolou­r brush and diluted black ink to lay a wash over the whole image of the panther. I use an airbrush to give a smooth feel quickly. To soften the edges of your background use an airbrush.

STEP SIX

Using your fiberglass brush, pull out highlights in the fur. Repeat the process of scratching back and adding washes until you have the form and depth of tone you desire. Use a straight edged nib for highlights in the eyes. When doing the whiskers, practice doing long sweeping lines on a spare board with the curved nib.

FINAL STEP

Sign your artwork and spray with fixative. I use Kylon Crystal Clear with UV protection. This spray gives me a matt finish and covers any fingerprin­ts or marks on the board. If you live in humid or wet climates do not spray your board on days of high humidity or your board will have a white ghosting film over it.

For those interested in a 10-day scratchboa­rd workshop, I will be teaching at the USQ Mcgregor

Summer School in Toowoomba, Queensland from 7-17 January 2015. See www.artsworx.com.au/comingeven­ts/the-art-of-scratchboa­rd/

More of Rikki’s work can be seen on her website www.rikkifishe­r.com In northern NSW, Rikki is represente­d by The Channon Gallery www. thechannon­gallery.com I

 ?? ?? FINAL STEP
FINAL STEP
 ?? ?? Above left: straight edge Above right: curved edge
Above left: straight edge Above right: curved edge
 ?? ?? STEP ONE
STEP ONE
 ?? ?? STEP TWO
STEP TWO
 ?? ?? STEP THREE
STEP THREE
 ?? ??
 ?? ?? STEP FIVE
STEP FIVE

Newspapers in English

Newspapers from Australia