> Step by step

Brassy lead

1

First, set Osc 1’s waveform to Pulse 1. Then, turn on Osc 2 and select Pulse 2 for the waveform. A little detuning will help to get the rich sound we’re looking for, so set Osc 1’s Detuning to 10, with Osc 2’s set to -8. Next, set the FX for both oscs to FM, with the amount at 15%.

2

Use the filter envelope to shape the sound to resemble brass more. Set the Filter to Clean LP, with Cutoff at around 900Hz. Push the Env 1 Amount to 40%, so that envelope 1 controls the filter. Set the Decay to around 60%, with the Sustain at 10%, opening/closing the filter nicely.

3

Increase the Amp Env Attack to 10%, and release to 50%. This’ll take some sharpness from the start of the sound, while letting it ring out like the original. Add a little chorus using HY-FX CM. Reduce the Chorus Depth to around 10 o’clock, then set the Wet/Dry to roughly 25%.