1. Ways of adding stereo width to mono sources

1

If you want to add stereo width to a mono signal the simplest way is to split it into two, hard panning the two signals in opposite directions and then delay one side slightly. This works for delay times up to about 25ms (the Haas effect). Any longer and you begin to notice the delay. 2

You can do this by duplicating the track and delaying one of the tracks. Or simply grab a utility delay plugin with millisecond delay capabilities. However, although this technique sounds great in stereo, when you mono it you will probably get comb filtering. 3

Whether the comb filtering in mono is a problem is, of course, subjective but also quite dependent on the type of sound and the exact delay timing. One option is to mono the signal and adjust the delay timing to get a sound that’s acceptable in mono. 4

If we combine delay with pitch modulation then we can reduce the comb filtering created by our delay technique and this is what a chorus does. However, to make this work as a widening effect, we need to split the effected and direct signals, much like the classic stereo chorus effect, panning one to the left and one to the right. 5

You’ll find that some plugins include this as an option. A plugin such as UAD’s Brigade Chorus, which is based on the famous Roland CE-1, includes the Classic mode for this purpose. Alternatively, grab a chorus with dual mono capabilities, setting the mix to 100% on one side and 0% on the other. 6

With the two signals basically hard panned to opposite sides this produces a pretty wide effect and it can sometimes sound a bit too detached. If this is the case you can simply use a stereo width plugin to make things narrower, or if you’ve used two separate tracks, try reducing the panning.

7

A bit like applying delay, we can create width by shifting pitch. Typically associated with Eventide’s H3000 MicroPitchShift effect, the key here is that the shift is very small (a few cents) and that it’s different on the left and right. It can also be combined with a short delay like in step 1.

8

To match the classic effect, you’re looking for about +9 cents on one side and -9 cents on the other. Not all DAW stock plugins can deliver this sort of shifting in a convincing manner. Plugins such as Soundtoys Microshift and Eventide’s MicroPitch are purpose built for the job, but more general plugins such as Audio Damage Discord 4 are also perfectly good.

9

A variation on this is to modulate the pitch on one side using an LFO. This is a simplified version of another H3000 classic (Voice Doubler). Using H3000 Factory, I’ve augmented the existing micro pitch shift, setting the LFO to 1Hz and the shift limit to about 10 cents. Other good plugins for this include Audio Damage Discord 4 and Waves Doubler.

10

Mono to stereo plugins vary in their complexity and effectiveness but usually attempt to retain good mono compatibility. Couple this with their turnkey simplicity and they present a highly attractive proposition when you’re after a quick reliable way to add width to mono sounds.

11

Sidewidener is a free Suite plugin with three width modes that provide progressively more decorrelation and thus wider effects. Simply adjust the Width control to taste and use the Tone parameter to focus on the desired frequencies. It’s simple to use, doesn’t degrade your mono signal and is, of course, free.

12

If you have some budget, Nugen’s Stereoizer 3 is one of the best wideners around, handling both mono and stereo sources. For mono sources you have two algorithms based on timing and intensity, and both include frequency limits and focusing. It’s highly flexible, sounds excellent and has great mono compatibility.