MERIDA SILEX 400
£1400 Mountain-bike influenced design
The Silex takes more influence from mountain biking than road. The difference lies in the increased stack to a tall 663mm, and a long reach of 430mm (see p40 for descriptions of both stack and reach). Longer reach usually means a lower position as you are more stretched out, whereas a taller stack means a more upright position. Here, Merida combines this mix of dimensions with a short 80mm stem. This means a position similar to a standard endurance bike, but with handling optimised for off-road as a slack 71-degree head angle increases the trail; this stabilises the front wheel while a short stem speeds up the handling responses from a long fork (397mm) (1).
Stem length has a big influence on how a bike feels to steer: a long stem gives you a longer steering arm – so it’s less responsive but more stable, think of a steering wheel on a truck, whereas a shorter stem makes it more responsive to steering inputs but feels less stable. Cleverly, on the Silex, Merida has sped up the steering response while slackening the head angle and lengthening the fork, so you have a bike that feels absolutely at home in the rough. It tracks superbly well and cuts through bumps with assured control without feeling sluggish.
We were hugely impressed with the carbon Silex, which we reviewed in issue 339, praising the comfort of the chassis over rough, rutted tracks. This more affordable aluminium interpretation deserves high praise too, with the same full carbon CF2 fork, which is brilliant at cushioning the worst of rough surfaces with its sweptforward legs that taper down towards an almost vertical 12mm thru-axle (2). At the back the alloy 30.9mm post can’t quite keep the same plush
WE SAY...
Funtorideon the trails and will serve you well as a commuter ortourer
It blends superb ride position and brilliant off-road handling making this a bike that combines value with performance
feeling as the front, though it’s topped with a comfortable perch in Merida’s Expert saddle.
The frame features guard mounts, rack mounts, two cages (with two positions on the down tube) and double bosses on the fork legs for either a further two bottles or low rider/ anything mounts. That means it could easily be put into service touring, bikepacking or adventure cycling (it’ll also take 650b wheels). Or just simply commuting during the week and exploring at the weekends.
Equipment levels are a good-value mix of Shimano’s gravel-specific GRX from both 400 and 600 levels. The sub-compact 46/30 chainset and an 11-34 cassette give an excellent spread of gearing for off-road and on. The same is true of the Maxxis Rambler tyres, the 38c volume is covered with a tightly packed small-block tread that rolls well on tarmac and hard-packed dirt. The large shoulder blocks on the tyres provide bite in corners off-road but are so tall (and soft) they squirm somewhat when cornering.
Merida provides the lion’s share of finishing kit with own-brand parts. The cockpit is a fine combination of a smoothly shaped, minimal, alloy Expert CW stem and Expert GR bar. The bar shape is excellent offering a small amount of flare. Along with its oversized tops, padded textured tape makes for great hold on the tops, drops or hoods.
The Merida Comp SL wheelset is running cartridge bearing hubs although I did find that the freehub was somewhat draggy initially. On inspection the freehub had been packed with too much grease. A quick wipe and it was friction free.
The shallow aluminium rims roll well but the dimensions are narrow (for gravel) internally at between 17 and 18mm. The 38c tyres are about as large as I’d go (3). Going to the maximum allowed by the frame and fork of 42c (in either 650b or 700c) would need a wider rim to get the best performance.
The Silex offers something quite different in what is a rather packed playing field of gravel bikes. It blends superb ride position and brilliant off-road handling with fantastic ride quality making it a bike that combines value with performance.