heavy DUTY

Volvo EC250D and EC300D ex­ca­va­tors fea­ture in­creased power and dig­ging force

Earthmovers & Excavators - - Front Page - For more in­for­ma­tion on Volvo Con­struc­tion Equip­ment give CJD a call to­day on 1300 139 804 or view the full range on­line at www.cjd.com.au

Op­er­ate with in­creased power and dig­ging force with Volvo’s EC250D and EC300D tracked ex­ca­va­tors. With quicker cy­cle times and greater pro­duc­tiv­ity, these ma­chines will help you to get the job done faster. Com­bine that with im­prove­ments in fuel con­sump­tion, ease of use and ser­vic­ing, and of course the renowned op­er­a­tor com­fort you’ve come to ex­pect from Volvo – and these ma­chines truly do stand out as best in class for their re­spec­tive weights.

The EC250D and EC300D ex­ca­va­tors from Volvo Con­struc­tion Equip­ment are heavy-duty ma­chines that don’t dis­ap­point when it comes to heavy dig­ging and lift­ing du­ties. Let’s take a closer look at why these ex­ca­va­tors are lead­ing the in­dus­try in ex­ca­vat­ing equip­ment.

At the heart of them is a Volvo D7 en­gine, ca­pa­ble of de­liv­er­ing low emis­sions and high fuel ef­fi­ciency. The en­gine uses pre­cise, high-pres­sure fuel in­jec­tors, tur­bocharg­ing and in­ter­cool­ing plus ad­vanced elec­tron­ics to op­ti­mise en­gine per­for­mance. An ad­vanced mode con­trol sys­tem en­sures the max­i­mum pos­si­ble hy­draulic horse­power avail­able is de­liv­ered at a con­stant en­gine speed un­der vary­ing load con­di­tions.

From util­ity and con­struc­tion to mass ex­ca­va­tion and load­ing, these ma­chines have the ver­sa­til­ity and abil­ity to cope with a wide range of tasks. Fit­ted with Con­tron­ics, the ad­vanced mode se­lec­tion sys­tem al­lows op­er­a­tors to choose from four work­ing modes that best suit the job at hand. This not only tai­lors the per­for­mance of the ma­chine to the ap­pli­ca­tion, it also op­ti­mises the use of fuel.

Modes in­clude Idle, Fine, Gen­eral, and Heavy. Per­for­mance can be fur­ther matched to the task by an at­tach­ment man­age­ment sys­tem, which stores up to 18 dif­fer­ent at­tach­ment pre­sets.

Volvo CE knows that when op­er­a­tors are com­fort­able they ex­pe­ri­ence less fa­tigue and work more pro­duc­tively. That’s why the Volvo EC250D and EC300D ex­ca­va­tors of­fer op­er­a­tors ex­cel­lent vis­i­bil­ity, ideally placed con­trols, max­i­mum com­fort and a qui­eter place to spend their days. Thanks to ROPS pro­tec­tion and mounted-on damp­ened cab mounts that iron out vi­bra­tions, the cabs are also a lot safer for op­er­a­tors. Trust Volvo to think of ev­ery­thing and in­crease your pro­duc­tiv­ity.

With built-in ser­vice­abil­ity, the EC250D and EC300D help you to get the most out of each work­ing day. Volvo en­gi­neers have de­signed these ma­chines to make main­te­nance easy – with safe and easy ac­cess to cen­tralised fil­ters and grouped greasing points.

Ser­vice points are sim­pler and safer to reach via wide open­ing com­part­ment doors. A quick check of the mon­i­tor in the cab al­lows tech­ni­cians to eas­ily per­form di­ag­nos­tic checks.

Of course, as stan­dard, these ma­chines come fit­ted with CareTrack, the Volvo Con­struc­tion Equip­ment telem­at­ics sys­tem. Ac­cessed re­motely, CareTrack pro­vides ma­chine in­for­ma­tion such as fuel con­sump­tion and ser­vice re­minders that al­low im­proved plan­ning and op­er­a­tion. A com­pre­hen­sive range of ser­vice plans are also avail­able from na­tional dis­trib­u­tor for Volvo CE, CJD Equip­ment, rang­ing from rou­tine wear in­spec­tions to full ser­vice agree­ments.

CJD Equip­ment’s part­ner­ship with Volvo CE ex­tends more than 25 years.

With a strong net­work of branches across Aus­tralia it has the abil­ity to pro­vide un­ri­valled sales and sup­port to its cus­tomers.

These ma­chines have the ver­sa­til­ity and abil­ity to cope with a wide range of tasks.

Newspapers in English

Newspapers from Australia

© PressReader. All rights reserved.