Elektron Analog RYTM MKII
The MKII version of the Analog RYTM has all-new hardware and some juicy new features. Dan ‘JD73’ Goldman dives in…
Back in 2014 I had the pleasure of reviewing the Analog RYTM (MKI). Since then, it’s had big respect among beatmakers alongside the also-analogue DSI Tempest, and MFB Tanzbär. Now it’s time to check out the MKII and see what’s new…
The first obvious change is hardware. Gone is the dark grey case, replaced by light grey aluminium, tilted for easier use. Its new white-on-black OLED is much easier to read, though I still prefer the warmer, yellow-on-black OLED in the new Digi series boxes. Next up, the old rubberised clickable encoders have been improved in feel and resolution, while the hard plastic buttons have been changed to the ultra-durable design seen in the recent Digitakt. Like with the RYTM MKI, have the manual on hand, as the navigation can induce some ‘brain ache’ but in general, navigation feels more intuitive on this MKII version.
At the heart of the RYTM MKII you’ll find the same excellent eight-voice analogue/digital sound engine as found on the MKI (with digital noise/envelopes/LFO), mated to the familiar 13-track sequencer (12 tracks plus an FX track). Each track is selected by pressing the track button and corresponding pad (though I wish pressing a pad just auto-selected the track to remove this extra step). The most obvious difference on the MKII’s front panel is that the old, small, hard backlit pressure-sensitive rubber pads have been replaced by larger, softer versions so you can finally enjoy finger drumming on the RYTM (a huge improvement over the MKI). Entering beats with the pads and changing scenes and performances is much more inspiring and you’ll find yourself relying a lot less on the step buttons to program beats. Also, like the Tempest and the latest MPC’s, the pads light up to reflect their status and similarly, the RYTM also shows different velocity levels and modes using coloured backlights. As well as looking great, this also keeps you abreast of things, even when complex patterns are flowing.
As before, each pad/track can contain one of nine ‘machines’ which are self-contained synth engines dedicated to making a particular type of drum sound. You can configure a pad/track to contain a single machine, a machine plus a sample, or just a sample. Pad 1 (labelled BD) has now been upgraded to include six kick types (including FM, Plastic, Silky and Sharp) while Pad number 2 (SNR) has four types, along with one type of clap and two rimshot types, both of which use dual-oscillator machines with each having parameters optimised for creating that specific type of sound. You’ll also find machines for low, mid and high toms plus open and closed hats, cymbals (ride/crash) and cowbells. There’s a lot of scope for creating all manner of analogue sounds/sonics from classic Roland-ish stuff to more subby/trippy sounds (though some sounds do take more work to dial in than others due to the number of parameters on offer and some new snare, clap and hat machines would’ve been nice too). Thankfully, the MKII’s flexible architecture allows for further machines/modes to be added and a ‘Dual VCO’ machine is currently in beta.
Despite the complexity of the RYTM MKII, the machine concept still takes the headache out of creating complex analogue drums by giving you preset routings. In contrast, a machine like DSI’s Tempest will require you to have some strong prior knowledge of what makes analogue drums tick to get your sound happening – which you may or may not think is a good thing! However, in this case it’s simple – want an analogue bass drum? Select a kick machine, and all the infrastructure is ready to go. Want a snare? Same deal. You don’t have to be a master synthesist to make killer analogue drum sounds here, which means you can concentrate on making beats!
It’s also cool that you can push each machine beyond its intended use, so, for example, the BD Machine works as a simple two-oscillator synth which is just about versatile enough for making basic synth basses and leads, especially when in combination with the powerful multimode filter and envelopes.
You don’t have to be a master synthesist to make killer drum sounds here
Building patterns (which can be up to 64 steps over four pages with independent lengths) is fun and patterns can be chained or formed into a song too. Note that unlike the Digitakt, the RYTM doesn’t offer external MIDI sequencing so pattern/ song MIDI won’t be transmitted. It’s also a shame you can’t name patterns like on the Digitakt/Digitone but you can at least name kits to keep things tidy. Each pad having a dedicated track still makes sense as you can tap out a beat simultaneously on kick, snare and hats in real-time and each will go to its own track (something the new MPCs now finally have too)! For correcting sloppy performances/ timing, non-destructive real-time quantise can also be set globally, or per-track along with swing (which feels great). This gives you access to semi- or hard-quantised feels per instrument, which is super-flexible. Of course, you still have access to classic drum machine parameters too, including slide and accent (per-step).
As before, there are two main modes of pattern building; recording in step mode or real-time. Step mode is simple; hit record and add steps using the square trigger buttons along the bottom of the front panel. The button will then light to denote an event or flash to denote a ParameterLocked setting. One of the biggest pulls of Elektron gear is the Parameter-Locking which lets you lock multiple parameter changes to every sequence step by simply holding the respective step’s trigger button, selecting the parameter(s) you want to alter, turning the respective encoder(s) and then letting go of the step trigger button. You can also ‘sound lock’ which lets you jump between completely different sounds on each sequence step (on a single track or more), making for hugely complex patterns. In addition, the RYTM MKII features the highly regarded ‘trig conditions’ and a dedicated fill button, which allow events/fills to occur based on probability. So you could have a one-bar beat with the snare on beat 2 only happening every fifth time the beat plays. This gives loads of mileage from just a single bar pattern and greatly extends the flexibility of the RYTM. The new QPER button and corresponding knob also extends the capabilities further, allowing you to quickly select a performance, tweak it, and simultaneously tweak other parameters; this is much improved over the MKI and saves changing modes while beat making, speeding up the workflow. However, I’d still welcome the Digi series’ ‘Control All’ feature which allows global filter/ envelope/parameter changes from one encoder and demands zero setting up before use (unlike scenes and performances). Maybe this mode could be added in firmware?
The MKII sounds just like the MKI, which is no bad thing! There’s plenty of low end extension, punch in the mids and rounded, classy high end. Compared to the Tempest, the RYTM MKII is still darker sounding when using the analogue side but then the RYTM excels at more moody, atmospheric tones. There are also big bonuses with the MKII – firstly that each track now has an individual out on the back panel (which can stream live to your DAW via Overbridge) but the biggie is that Elektron have listened to users and included Digitakt-style sampling (stereo is similarly summed to mono when recording). Simply hit the Direct button, hit Func+yes to record, set source to record from external or internal audio, then add your sample direct to a track or to the sample pool on the +drive. As on the Digitakt, the recorder leaves the main sample intact, so it’s easy to keep revisiting it and pull out more pieces (the sampling workflow is intuitive too).
Finally, the analogue overdrive still sounds great, the filters are juicy and versatile, the envelopes punchy and Elektron’s reverb and delay are still some of my favourite built-in FX. The new free Overbridge software (which fully integrates the RYTM MKII within your DAW, due for release soon) wiil make this even more appealing. The RYTM has been improved in all the right places: a very accomplished drum machine that’ll keep you inspired for years.