Ambient techno tips – from sequencing to dub-style mixes

BEGINNINGS “The first thing I do is put some kind of clock down. I’d normally start with my 606 or the 909. The benefit of the 909 is I’ve got everything split out individually so I can have more control. For example, I’ll get a hi-hat pattern going and then put a bit of reverb on it from the Lexicon, and then some delay. I like to use two effects at the same time to get a wider sound.

“A lot of my tracks I’ll build up in that way, adding layers on top of layers. Once I’ve got it to a certain point then I start taking stuff out until I’m just leaving the bare bones.”

CREATING SEQUENCES

“A lot of work comes down to building different sequences. For example, I might get a rough rhythm going with the MS-20. I usually use the MS-10 with that, which I love. A lot of people find it horrible to use. The slightest tweak can make it sound wrong; there are basically no locked points [on the pitch controls] so it’s quite hard to get the right notes. But some of my best work, I think, has come from that sequencer.

“The main sequencer that I use is the SAM-16. As a non-musician I tend to write most of my stuff using sequencers, it’s an easier way for me to get notes down. I’ve had the SAM about three years now and I think it’s actually been used on pretty much every track I’ve done since then.”

SYNTH LINES

“The 303 played a huge part on

Future Rave Memory. It was essentially my main synth on it. I got it modded by Kenton a few years ago so I can have a bit more control of different aspects. Then I’ll often hook it up to a keyboard so I can control it that way too. I’ll use it to create multiple harmonic layers and have those playing off one another.

“I have one of the few MIDI Minimoogs, they’re known as the Welsh Moogs [produced by Cardiff-based company Moog Music Limited, which acquired the name in the ’90s]. I use the Moog a lot for tonal pads, and stuff like that.”

“I WANT IT TO FEEL LIKE THESE MACHINES ARE ALIVE”

CREATING ARRANGEMENTS

“What I’ll tend to do is build up different melodies and sequences. Then when I’m happy with each part, I put each down individually. I’ll do a long seven minute or so pass. That’s why I never have an arrangement in mind before recording, but I’ll create an arrangement with my passes, if that makes sense. I don’t like to do too much editing. I’ll build up a structure with each recording pass, letting each new one build off the last one.”

MODULATION AND MOVEMENT

“One of the things that is very important to me is how lines work off each other. A lot of that comes down to using things like the [Deltalab] Effectron so much, and not having delays that are exactly locked in and done more by ear.

“When I talk about processing my stems once I’ve recorded them, what I’ll do, for example, is send them through things like the Hiwatt Tube Tremolo pedal. When those modulation sounds aren’t locked in, it starts to feel a lot more organic and that’s what I want. I want to make it feel like these machines are alive and working off one another.” MIXING FUTURE RAVE MEMORY “Mixing the album took a while. I was doing things differently to how I used to. With the studio running live, I would record a pass, put it down, layer them up with the effects chains. Once I had those stems, I’d put them through the console and re-run them through my effects to do live dub mixes – that kind of Conny Plank technique. Sometimes I’d end up going back to each track three or four times until I couldn’t take it any further.”