Guitarist

Bad Cat Classic Pro reverb 1x12 combo

This Cat in tweed clothing from the SoCal company’s USA Players series offers plenty of bite from its 6V6 valves

- Words Nick Guppy Photograph­y Neil Godwin

As one of the original and most respected names in the so-called ‘boutique’ market, California­based Bad Cat Amplificat­ion produces point-to-point hand-wired designs that blend vintage valve know-how with exceptiona­l build quality. This comes at a price, of course, and in the past Bad Cats were exclusivel­y for those well-heeled enough not to need to ask “how much?”. However, things changed for the better when Bad Cat introduced its USA Player range, which uses high-quality PCB constructi­on to make substantia­l savings on build time, while managing to retain the all-important sound and response by

using the same transforme­rs and British-made Celestion loudspeake­rs as its more expensive counterpar­ts. The USA Player range has been a big success for Bad Cat, and here we’re looking at the latest addition, the Classic Pro Reverb combo.

Like all Bad Cats, the Classic Pro comes housed in a perfectly made Baltic birch ply cabinet. The 1x12 enclosure is slightly oversized to help bass response, and the usual Bad Cat attention to detail is everywhere. The tweed covering on this sample has no visible cuts, even in the tight radiuses under the control panel, which takes real skill. The tough ventilated aluminium chassis supports a pair of Bad Cat’s exclusive paper bobbin hand-wound transforme­rs.

Inside, the electronic­s are all supported on one large high-quality PCB, including the Classic Pro’s digital reverb chip, the front and rear panel components and the valve bases. This is where the cost saving is made, and yet the components are no different to those on a point-to-point Bad Cat and the board paths are big enough and thick enough to avoid signal degradatio­n. One benefit of using PCBs is consistenc­y, which is especially important in a high-impedance valve-powered circuit. Where each point-to-point amp in a production run will need careful attention to component and wire positionin­g, once a board is working to expectatio­ns, every copy of that board will be identical.

Feel & sounds

The Classic Pro Reverb is very quiet in operation, with minimal hiss and hum. This is a medium-gain circuit that sounds best when driven hard to develop overdrive in the power stage as well as the preamp, and to that end, the Classic Pro has two of Bad Cat’s special K Master master volume controls, one for rhythm and one for solo, which can be toggled using the single-button footswitch that comes with the amp. The K Master is a special circuit that works like a separate gain stage sat between phase splitter and power valves, which can drive the power amp independen­tly of the preamp, allowing full use of the gain control for clean and driven sounds, extending clean headroom and improving dynamics at low volume.

Driven at the levels it’s intended for, the Classic Pro produces sweet yet punchy clean tones, with a toothsome tweed-inspired bite from the 6V6s when the gain control is wound up. The digital reverb is excellent, adding a smooth halo to notes without any splashines­s.

The switchable dual master volume idea works well in practice. It does exactly what

it says on the tin, effectivel­y extending the Classic Pro’s range and making it sound much bigger than 20 watts. We tried the Classic Pro out with a selection of guitars and, while it sounded great with them all, we felt the best results came from our PAF-equipped Les Paul. The hotter output and bright top-end bite fit the Classic Pro’s tone perfectly, with plenty of sustain from the slightly higher output pickups. Played with lower gain and cleaner tones, the Classic Pro also sounds great with pedals, thanks to its series effects loop.

verdict

Bad Cat has unleashed another beast in the Classic Pro Reverb; the PCB doesn’t get in the way of that special Bad Cat sound and the rest of the amp is built to the same standard as topof-the-range hand-wired models. While this one sounds good with pedals, it’s very special when wound up, so it’s an ideal amp for purist players who like to control everything from the guitar. While it isn’t cheap, it’s relatively accessible compared with hand-wired Bad Cat models, so here’s a chance to own that legendary illuminate­d badge and all the great tone that comes with it.

It’s very special when wound up, so it’s an ideal amp for purist players who like to control everything from the guitar

 ??  ?? 1. Tweed is a difficult fabric to work with; the Classic Pro Reverb’s cabinet displays real skill and great attention to detail
1. Tweed is a difficult fabric to work with; the Classic Pro Reverb’s cabinet displays real skill and great attention to detail
 ??  ?? 2. A rear panel switch covering three standard impedances makes it easy to connect the Bad Cat with extension speaker cabinets
2. A rear panel switch covering three standard impedances makes it easy to connect the Bad Cat with extension speaker cabinets
 ??  ?? 3. The Classic Pro Reverb ships with a pair of 6V6 output valves, but can be rebiased to accept 6L6s, with a jump in output power from 20 watts to around 35 watts
3. The Classic Pro Reverb ships with a pair of 6V6 output valves, but can be rebiased to accept 6L6s, with a jump in output power from 20 watts to around 35 watts
 ??  ??
 ??  ?? 4. Celestion maintains a small production line in Ipswich for a few customers who insist on British-made loudspeake­rs – Bad Cat is one of them
4. Celestion maintains a small production line in Ipswich for a few customers who insist on British-made loudspeake­rs – Bad Cat is one of them

Newspapers in English

Newspapers from Australia