MARBLE EFFECT

DULUX® DURAMAX® MARBLE EFFECT GIVES OLD ITEMS A SOPHISTICATED BLACK OR WHITE MARBLE FINISH YOU CAN CREATE IN JUST MINUTES

WHAT YOU’LL NEED

• 1 can of Dulux Duramax Marble Effect White • 1 can of Dulux Duramax High Performance Enamel Ito • 1 can of Dulux Duramax Clear Coat Semi Gloss • 1 roll of good quality painter’s tape • Damp cloth • Drop sheet or newspaper • Lazy Susan

STEP 1 Mask the areas of your tray to stay unpainted with good quality painter’s tape. Some lacquered timber finishes will need to be primed with one coat of Dulux Duramax Undercoat. (If unsure, it’s best to prime with Dulux Duramax Undercoat to eliminate any adhesion issues.) STEP 2 Once undercoat is dry, apply 2 coats of Dulux Duramax High Performance Enamel Ito following instructions and dry times on the label. STEP 3 To achieve a realistic marble look, Dulux Duramax Marble Effect should be applied with quick hand movements from multiple directions and 25cm or more from the tray. Every marble finish will be unique so don’t think too hard about the pattern you are spraying. Once the tray has dried, remove tape and spray entire tray with Dulux Duramax Clear Coat Semi Gloss.