Sound+Image

CINEMA WITH THE X FACTOR

Krix’s The Series X is the very top of suited home cinema loudspeake­r range, at home’ to those wanting ‘real cinema one. in a large-scale space... like this Mona Vale Installati­on by Sydney Hi-Fi,

-

The Series X is Krix’s very top home cinema range for large-scale spaces. Sydney Hi-Fi Mona Vale sizes up this sensationa­l installati­on.

We recently featured a home theatre installati­on which used Krix’s Series MX “wall of sound”... but Krix has one level above even these in its home range (and of course, real commercial cinema speakers above that). The toppermost of Krix’s home speaker range is the Series X.

So we were keen to bring you this installati­on using the Series X, completed by Sydney Hi-Fi Mona Vale, where Director Mick Stillone had taken over the home cinema project after being recommende­d by friends of the home owners.

“The client knew that they wanted a good cinema system — they’d had a system in a previous house and enjoyed watching movies with their children and extended family,” Mick remembers. “And this new room was initially quoted by another installer as a 7.1 system, the same as in the previous home. The products were all good, but they weren’t suitable for the size of room to achieve a good SPL [sound pressure level] from the planned seating positions, based on what the client expected.”

While Mick could see how the cinema should be designed, he was also aware that he’d be quoting higher than the other installer’s suggestion, the solution being both higher quality and more comprehens­ive. The owner wasn’t aware, for example, about the possibilit­ies of Dolby Atmos.

“We always provide a degree of education, so clients are able to make informed decisions,” explains Mick. “We discussed the advantages of Atmos, and demonstrat­ed the solution — which went down well. We discussed the expectatio­ns and the technologi­es, and the client was happy to go

with our equipment recommenda­tions, but of course we did have challenges with budgets, because we were quoting against that relatively simple original 7.1 theatre solution. We spent a considerab­le amount of time in discussion­s, explaining SPL and the importance of why the speakers had to be so big, why we needed to use three surrounds on each side, why the amplifiers we were using needed to be stable at two ohms.

“And we spoke about Krix, their involvemen­t in commercial cinemas and the support we receive from Krix as a business partner. All this gave our client confidence. He understood that we were creating an impressive room that would give the ‘wow’ factor, and we were given the go-ahead.”

The only stumbling block was the projector, since for the size of screen and the room length, the ideal would be a very high-level projector to maintain excellent picture quality. This suggested a projector price-tag potentiall­y over $60,000, a cost which it was felt might stall the room progress.

“So we decided to do some testing with projectors under the $20k mark, settling on the Sony used here,” says Mick. “We tested it in relatively poor lighting conditions, and the client was happy with the results. By setting it up eight metres from the screen, the client was happy with the end result. I felt we were losing some light and focus to the far corners of this 206-inch screen, but the client felt both the picture quality and value exceeded his expectatio­ns.”

X hits the spot

Why were Series X speakers used, then, and not, say, the Series MX solution?

“We did consider the MX-30 wall,” says Mick. “But the room being 12 metres long, with the three seating rows at 4.5 metres, 6.5 metres and close to 9 metres for the third row [see above, and more plans overleaf], we felt that the MX-30 would be borderline to achieve SPLs of 105dB. Also the MX-30 wall will not provide for angle adjustment for midrange and tweeters, and with the third row being 600mm higher than the first row, we knew positionin­g the MX-30 for all three rows would be tricky.

“With the Series X we were able to make angle adjustment­s to the high frequency drivers, which also helps with the sharpness of the horns. We had consultati­ons with Krix to get the mid and high frequency driver height positionin­g just right. The end result is stunning — rich dynamic sound. And it has an amazing live sound with music, too. We listened to Joe Bonamassa, the Blu-ray of ‘Live from Albert Hall’ — the track High Water Everywhere was just amazing.”

Ch-ch-changes

Not that it was all plain sailing, with room layout changes continuing as the project progressed. The owners decided they wanted a kitchen as

well as a bar at the rear of the cinema — great for the movie night experience, but taking over positions where equipment had been planned.

“Yes, this element popped up close to completion,” says Mick. “It ran the length of the back wall, and the height encroached on the artwork — a custom-made print of a design by the client’s graphic-designer brother, which had already been printed by then. We had to raise the rear speakers, angle them down and re-design the artwork to allow for the kitchen bench, sinks and a high tap fitting.”

The star ceiling also grew to encroach on planned speaker positions.

“Initially the star ceiling was only going to be a small feature,” says Mick, “but it became extended to cover the entire ceiling. The Atmos speakers had to be moved in to accommodat­e the larger bulk head. But it was OK, the changes just created some re-working of the acoustic plans and speaker heights. It all worked in the end.”

To put this impressive project in context, the cinema is just part of a sizeable new-build home, built over four levels, with extensive water views.

“To give some sense of proportion, the cinema room is 12 metres by 6 metres, and that occupies less than a quarter of the floor space on a single level,” says Mick. “The house is using Crestron to control lights, blinds and multiroom audio, which was already organised, so although we had originally specified a Clare system for control we continued the Crestron into the cinema for consistenc­y, where it controls all the theatre functions and screens linked to the LED lights and star ceiling.”

Magical movie nights

The family is, needless to say, exceedingl­y happy with their new home theatre.

“Indeed!” says Mick. “And I must give credit to the team at Krix — fantastic to work with, all the technical support available to us on a project of this scale. The client has on many occasions told us the cinema is his favourite room of the house.”

Which in a new-build home of these proportion­s, is quite the compliment.

 ??  ??
 ??  ?? ▲ The three-way Krix Cinematix used here for front LCR speakers — 199cm high, with dual 15-inch bass drivers.◀ The custom artwork positioned above the kitchen/bar at the rear of the room (see also overleaf).
▲ The three-way Krix Cinematix used here for front LCR speakers — 199cm high, with dual 15-inch bass drivers.◀ The custom artwork positioned above the kitchen/bar at the rear of the room (see also overleaf).
 ??  ?? ▲ The complete three-row 15-seater home cinema with 206-inch projection screen and — the new seats still tagged. ▶ CAD-planning the theatre to ensure sightlines and full SPL to all positions.
▲ The complete three-row 15-seater home cinema with 206-inch projection screen and — the new seats still tagged. ▶ CAD-planning the theatre to ensure sightlines and full SPL to all positions.
 ??  ?? ◀ The Sony projector was to be hidden in the bulkhead, but changes to the room design made mounting within an extended ‘star ceiling’ the best option.▼ Series X speakers installed within the sound treatment of the front baffle. ▲ The custom rear artwork draped over seating prior to mounting (above) and installed above the theatre’s kitchen/bar; the artwork also doubles as acoustic treatment for the room. “Some people thought we’d put a second screen at the rear!”, says Mick Stillone from installer Sydney Hi-Fi Mona Vale.
◀ The Sony projector was to be hidden in the bulkhead, but changes to the room design made mounting within an extended ‘star ceiling’ the best option.▼ Series X speakers installed within the sound treatment of the front baffle. ▲ The custom rear artwork draped over seating prior to mounting (above) and installed above the theatre’s kitchen/bar; the artwork also doubles as acoustic treatment for the room. “Some people thought we’d put a second screen at the rear!”, says Mick Stillone from installer Sydney Hi-Fi Mona Vale.

Newspapers in English

Newspapers from Australia