How to turn an old laptop into a Chromebook
Not only will you save money, but some older laptops have better hardware than cheap Chromebooks.
Not everyone needs a computer with a full set of bells and whistles. A Chromebook’s simplified interface makes it popular with schools – and those of us who serve as IT support for less tech-savvy relatives. You don’t need to worry about managing irritating updates or avoiding malware on a Chromebook, like you do if you simply install Chrome on an old Windows laptop, and the lightweight operating system feels much snappier
than Windows on modest hardware. Chromebooks can cost less than a budget PC, too.
You might not even need to spend anything if you have an older laptop already lying about. Installing the equivalent of Chrome OS onto aged hardware takes less than an hour’s worth of elbow grease, and the final result often feels snappier than today’s dirt-cheap Chromebooks.
Here’s how to do it.
CONVERT A LAPTOP INTO A CHROMEBOOK
For this project, we’ll be using Neverware’s CloudReady operating system, which is based on Chromium OS – the same open-source code that Google built Chrome OS on. You can read more about the basic differences between the two if you’re curious at fave.co/3kHDvxG, but all you need to know is that Neverware has made the experience of using CloudReady all but identical to Chrome OS.
Note: CloudReady lacks access to the Google Play Store – so if support for Android apps (like Minecraft) is integral to your needs, you’ll have to buy an official Chromebook.
Step 1: Check that your laptop will meet the requirements
Like Chrome OS, CloudReady’s system requirements are very minimal. The laptop must have 2GB RAM, 16GB storage, full BIOS access, and ideally been manufactured after 2007. You will still need to check your CPU model, though, as Neverware says that processors with Intel Graphics Media Accelerator (GMA) 500, 600, 3600 or 3650 graphics hardware don’t meet CloudReady’s performance standards. (In other words, Atom processors from
the Silverthorne, Lincroft and Cedarview families, which were found in low-end laptops between 2008 and early 2012.)
Your best-case scenario is to find your laptop on Neverware’s list of certified devices (see fave.co/3kEh78i), which clearly outlines support for features like a webcam or touchscreen. (Click on the model’s name to see those details.) We lucked out that our test model, a 2013 Lenovo ThinkPad X240, had full feature support across the board.
If your laptop meets the hardware requirements but isn’t on the certified devices list, don’t worry. You can try out CloudReady from the flash drive you’ll create next, which will allow you to test out how well it works without having to nuke your system.
Remember, before you begin installing CloudReady, back up any files within your existing operating system The process is the same as a clean install of Windows, Linux or macOS and will completely wipe your drive.
Step 2: Prepare the flash drive for installation
To install CloudReady, you’ll need an 8GB USB drive (at minimum) and a PC, Mac or Chromebook to create the installation media. The process takes about 20 minutes.
We’ll be using CloudReady Home edition (available from fave.co/2FYfO5c), which is free and will work even if you plan to use this Chromebook for school. You can ignore any notes or warnings about restrictions related to management licenses – they’re for the CloudReady Enterprise and Education versions, which would be purchased by an institution.
Using a Windows PC to create the flash drive installer is easiest, as you can download the USB Maker and let it take care of the whole process. For Macs, Linux PCs, and Chromebooks, you’ll need to download the CloudReady Home Edition image first, then follow Neverware’s instructions for manually building your installer.
Step 3: Boot to flash drive
In order to boot to your newly created flash drive, you must bypass your laptop’s automatic boot order, which usually defaults to the primary storage drive. You’ll do this by hitting a key on your keyboard when your PC first powers up, similar to entering the BIOS. Search online for how to access the boot priority menu for your particular laptop, since it’s not universal. For example, our Lenovo ThinkPad X240 required mashing F12 right at start-up, while for our HP Spectre x360, it was F9. CloudReady even provides a list of boot keys for major laptop makers.
An alternative method is to enter your laptop’s BIOS (again, you will need to search for which key to press when powering on your laptop) and rearrange the automatic boot order, then undo that change after your CloudReady install.
In either case, you should be able to choose the USB drive as your boot device. A white screen with the CloudReady logo will appear shortly.
Tip: Did you end up in your laptop’s default operating system after booting, despite repeated button mashing? You likely waited too long to start pressing the key, or you aren’t pressing the right combination of keys. (Example: Function keys may require also holding the Function key – or not.)
Step 4: Install CloudReady
When the welcome screen appears, you can take one of two routes: immediately
wipe your laptop’s drive and install CloudReady, or configure CloudReady on the flash drive. Choose the latter if you’d like to test drive CloudReady for short while – doing so allows you to try out Neverware’s OS without any destructive changes to your system.
Note: Neverware does not recommend running CloudReady indefinitely from a USB drive due to performance and storage limitations, as well as a lack of OS updates.
Option 1: Installation
After booting to the flash drive, wait for the welcome screen to appear, then click on the bottom right-hand part of the screen where the time shows. In the menu that appears, choose Install OS.
Confirm you’ve backed up your data, and then proceed with the hard drive wipe and CloudReady installation. Neverware says the process will last between five and 20 minutes, depending on the speed of your flash drive and the size of your laptop’s hard drive.
Upon completion, your laptop will shut down. Remove the USB drive, then power the system back on (and undo any changes to your BIOS’s automatic boot order, if applicable). You’ll see a welcome screen once again, now running from your laptop. Click on Let’s Go to begin set-up.
Option 2: Try out CloudReady from the flash drive
When the welcome screen appears, click on Let’s Go to start set-up. After passing through configuration screens for Wi-Fi, data sharing, and Google account login, you’ll reach the desktop. Close out of the pop-up window that shows info on the paid editions and current release notes to begin using CloudReady.
You can later install CloudReady locally by clicking on the time in the bottom right-hand part of the screen. Choose Install OS in the menu that appears. After completion, your laptop will shut down. Remove the USB drive, then power the system back on (and undo any changes to your BIOS’s automatic boot order, if applicable). You’ll see the welcome screen once again, now running from your laptop; begin set-up by clicking on Let’s Go.
Step 5: Enable Proprietary Media Components
In order for CloudReady to function just like Chrome OS, you’ll need to take one extra step. Paid video streaming services that rely on DRM protection (like Netflix) won’t work until you enable a set of proprietary media plug-ins. It’s
the only thing that doesn’t work right out of the box.
Access the system settings by typing chrome://os-settings into a Chromium browser window. (You can also click on the time in the bottom right of the screen, and then on the gear icon.) Choose Media Plug-ins, then install Proprietary Media Components.
You can also choose to install Adobe Flash now, too, though it will still remain off by default. You’ll need to finish enabling Flash afterward by opening Chromium and navigating to Settings > Site Settings > Flash, then clicking the toggle next to Block sites from running Flash. That will change the setting to Ask first, allowing you to activate Flash on a caseby-case basis.
HOW WELL DOES IT RUN?
For this article, we used a 2013 Lenovo ThinkPad X240, borrowed from our IT department’s stash of decommissioned
laptops. This 12.5in touchscreen laptop is long in the tooth by today’s standards, mostly due to a spinningplatter hard disk drive – when working within Windows 8.1, I could feel delays in response during mundane use.
But our X240’s Intel Core i5-4300U processor, 8GB RAM, and 500GB drive absolutely crushes today’s budget Chromebooks. It hangs pretty well with mid-range models, too, despite its 1,366x768 resolution display. When we tried CloudReady off the flash drive, the touchscreen worked immediately and the system ran buttery smooth; even when installed on the hard disk drive, CloudReady had a much faster response time than Windows 8.1. Normally I’d swap in an SSD on a semi-older laptop to prolong its life, but I found I could use CloudReady on the X240’s existing hardware without yearning for that upgrade.
Standby battery life also improved, allowing us to go from a day of use between charges in Win 8.1 to a couple of days in CloudReady.
IF YOU DON’T HAVE AN OLD LAPTOP
Try hunting for gently used notebooks among reliable friends or family. Local universities sometimes also have surplus departments, which offload older computer equipment by selling it to the public. There are also plenty of online stores selling refurbished computers .
FINAL TIPS
• If your older laptop has low-end hardware (or very old hardware) paired with a hard-disk drive, you’ll get better performance by swapping in an SSD. Make sure to find out the height of your existing hard drive before buying, so that it’ll fit the space.
• Though CloudReady functions all but the same as Chrome OS, one small difference is that the keyboard layouts don’t match exactly. Most keyboard commands carry over, but a few are a little different. Our Lenovo ThinkPad X240 didn’t even match Neverware’s suggestion of Ctrl + F5 for taking a screenshot; for some inexplicable reason, Ctrl + F11 worked instead. You may also need to experiment to find the right key combos.