¡Tecnología para el campo!
Two ex-ibmers are building the first American factory in a very low-tech nation
Come on, boy! Get dressed! We got to go!” yells Horace Clemmons. He’s heckling his longtime friend and business associate, Saul Berenthal, who sits cross-legged on a leather chair in the living room of Clemmons’s home in Paint Rock, Alabama. It’s a Tuesday in mid-april, and the duo is scheduled to give a presentation to a group of local investors about their new business, Cleber. In February, the U.S. Department of the Treasury approved Cleber’s request to be the first U. S.-based company to construct and operate a manufacturing facility in Cuba. They plan to build low-techow tech tractors for small farms.
“All right, all right!” Berenthal says, grinning, ning, stretching his vowels. “But I need to seee my choice of dress first.” He stands up and saunaunters into the guest bedroom. He’s come from om his home in North Carolina for the event and is staying with Clemmons.
“You just have to choose if you want to wear the sport jacket or not,” Clemmons calls alls after him in his slouchy drawl. A minute later,ter, Berenthal comes out. He’s wearing slacks and a blue button-up shirt, untucked, the collar loose and the cuffs buttoned.
“You look handsome, dude!” says Clemmons. Both men are in their early 70s, sinewy, buoyant with energy. Berenthal was born in Cuba in 1944 and moved to the U.S. in 1960 after the revolution. He has slicked-back hair, pale olive skin, and a swagger highlighted by incessant gum chewing. Clemmons, an Alabama local, is decidedly more of a country boy, with a short-sleeved, collared shirt tucked into straightcut Levis, wire-frame glasses, a baseball cap on his head, and posture as straight as a tree trunk. The two met in the early 1970s while working for IBM. Berenthal had a sales position in the New York City office; Clemmons worked in Raleigh, N.C., at
the development branch. During a trip
to Raleigh, Berenthal hit a snag with a client and needed help over a weekend. Referred to Clemmons, Berenthal drove to his home to find him in overalls, working in the yard. “I thought, ‘ This is the guy that’s going to fix my problem?’ ” Berenthal recalls. But the guys clicked and, after Berenthal transferred departments and moved to Raleigh, became close friends. In 1983 they hey left IBM to start Post Software International,, a point- of- sale software company. They sold the company in 1997 to Fujitsu for an undisclosed sum, though it seems too have been enough for Clemmons to build his current home, a 7,000-square-foot mansionion made of cypress logs, on a 2,200-acre plot.
Now the pair are back at the entrepreneurial grind. Since getting the go-ahead from the U.S. government, they have been finalizing their first tractor’s design and sourcing materials, manufacturing prototypes to be tested in Cuba, nailing down the construction logistics of their facility, negotiating terms and conditions with the Cuban government, and hoping to raise $15 million in funding. They’re scheduled to begin operations in 2017. They’ve just returned from a two- day road trip to Illinois to meet with a hydraulics manufacturer about some parts. Clemmons drove, while Berenthal sent e-mails and made phone calls.
As they grab their bags and head for the door, Clemmons’s wife, Elizabeth, calls out, “Good luck! Bring home lots of money!” She’s wearing a pink shirt printed with the company’s logo and “Oggún,” the name of its tractor. In the Afro-cuban religion known as Santeria, Oggún is the deity of metalworking. The spirit is a warrior and a protector. He paves the road ahead—an embodiment of potential and a symbol of hope.
Berenthal had been bugging Clemmons for years about starting a business in Cuba. He watched the changes on the island, most notably Fidel Castro’s offhand remark in 2010 that the economic model wasn’t working. In December 2014, when President Obama announced that the U.S. would begin reestablishing diplomatic relations with Cuba, Berenthal called Clemmons. As he puts it, “I said, ‘ This is the time. Let’s go do it.’ ”
Despite being a great place to grow things, Cuba imports 80 percent of its food at a cost of $2 billion per year. Almost 70 percent of its land, about 19 million acres, is fertile, but only 40 percent is used for farming and agriculture; 20 percent of the labor force, or about 1 million people, is employed in agriculture. The country has about 200,000 small, privately owned farms, as well as regional co- ops. The government runs the production of crops such as sugar cane. About 4 million people, 36 percent of the population, depend on agriculture in some way for their livelihood.
“Cuban farmers all agree that Cuba has the potential to produce more. All that needs to change is the mechanism of production,” says Mario González- Corzo, a professor of economics at Lehman College at the City University of New York, who was born and raised in Cuba and specializes in Cuban agriculture. “When I visit Cuba and talk to farmers, it all comes down to machinery.” Much of the island’s equipment is almost 30 years old, pieced together from allies such as China and the former Soviet Union (González- Corzo’s cousin owns a farm in Cuba; his tractor was built in the 1950s). Maintaining a working tractor has become so difficult that many farmers have gone back to using animal labor. “I said, ‘Saul, the Cubans will evolve differently than Americans evolved, but they will start at the same place we started,’ ” Clemmons says. “They are going to start at the single-row tractor.”t By that, he means a small tractor that will plowplo one furrow at a time. More than anything, Berenthal and Clemmons know that Cuba is still Cuba, and that the Cuban government will want a socially conscious business model. “If you are going to approach Cuba with ‘I w want to sell you something,’ it ain’t going to work,” Ber Berenthal says. “That’s not what they want. They don’t wantw to be dependent and buying from the rest of the world forever. If you are going to propose a project, it has to have an economic, social, and cultural justification.”
At the presentation, the two address about 15 potential investors. Clemmons opens, noting that, although they’ve received calls from interested parties about Cleber, this is their first official pitch for seed funding. He then turns the podium over to Berenthal. “Horace is inspirational, and I am operational,” Berenthal says. “I want to try and get you through how I always try to make happen what he dreams.” The crowd laughs, and Berenthal dives in.
The Oggún may be the world’s first open source tractor. The frame of the Oggún 1.0 base model is an original design but rooted in the Allis- Chalmers Model G, a mainstay of the postwar farming boom of the late 1940s and early ’50s. (Coincidentally, the Model G was manufactured in Alabama.) It’s a bare-bones design, the tubular frame of which is reminiscent of a homemade go-cart—sturdy, simple, and open to the elements. The driver sits high up for visibility; the motor is behind, bolted to the frame between the rear wheels.
The frame of the Oggún can support an 18- to 25- horsepower gas or diesel engine. Cleber has seven manufacturers—american, Japanese, British, German, and Italian—that can supply a compatible motor, allowing more versatility when sourcing. A series of belts drives two hydrostatic transaxles— essentially, axles turned without shifting gears— one for each rear wheel, similar to many lawn tractors. You push the gas pedal and go. The axles can be widened—from 38 to 60 inches in the front and 36 to 46 inches in the rear—providing versatility when planting rows of crops, navigating narrow paths, or transporting the tractor in a trailer or the back of a truck. The rear axles can be loosened using hand tools, extended outward, and tightened again. At the front, the frame has notches every two inches. All the farmer has to do is jack it up, remove the bolts, slide the wheels over, and put the bolts back in.
Additional farming implements can be hooked up to the tractor. The more popular ones are likely to be a plow to break the ground, a cultivator to aerate the soil, and a planter to drop in seeds. Under the belly of the tractor is a hitch system for attaching implements.
Only a handful of components makes up the finished tractor: the frame, which is split into two parts that bolt together at the center; the motor and both axles; four rims and tires; the shaft for the front wheels; the steering wheel and column; the seat; hydraulic fuel tanks; and gas. “It’s excruciatingly simple,” Clemmons says.
Oggún 1.0 is expected to retail for $10,000, which is low for a tractor of this horsepower. The parts would initially be manufactured in the U. S., sent to Cuba, and
assembled by Cuban workers at a planned 66,000- sq.-ft. facility in Mariel, a burgeoning port and special development zone west of Havana along Cuba’s northern coast. As the business expands, Berenthal explains, the company plans to eventually manufacture parts on- site and hire more employees. The Cuban government would take care of human resources, using criteria submitted by Cleber to find employees and negotiate salaries.
The company could break $100 million in sales within 10 years if all goes well, Berenthal says. By the second year, the two hope the Mariel-based facility will be exporting tractors to other countries in Latin America.
The company’s business model has its risks. It’s contingent on farmers having money to buy a tractor or having family in the U.S. who can send them money to buy one; or on a European banking institution willing to give out loans; or on the Cuban government, a notoriously fickle and unpredictable entity, allocating funds in the national budget to purchase tractors for its residents. “The question really is, can they provide, or work with the government to offer, some form of financing so the farmer can afford the cost of the tractor?” says González- Corzo.
After the presentation, Clemmons and Berenthal drive back home to Paint Rock to eat a late dinner. No one at the conference made any on-the- spot offers, although a few potential investors said they were intrigued and expressed admiration. “This was a good test round, a learning experience, rience,” ClemmonsClemmon tells me in his kitchen, carving slivers o off a block of manchego cheese, while Berenthal eats cereal. “Like I told them at the beginning, we’ve never had to ask for money before.”
It seems promising, though, that no one qu questioned the validity of their idea or the im impact it would have on the Cuban people.
“How often do you get the opportunity to make history and money at the same time?” Clemmons says, munching on a slice of cheese. “All you have to do is listen to what people need.”
The next day, Clemmons and Berenthal wake up at 5 a.m. After a breakfast of eggs, bacon, and rye toast with homemade blackberry jelly, they drive 40 miles east to Liberty Steel Fabrication in Fyffe, Ala., for a 9 a.m. meeting with its owner and president, Kelly Pittman, who’s in charge of designing the facility in Mariel as well as manufacturing many of the parts for the Oggún 1.0. Details have to be ironed out before the team presents the plans to Cuban officials and ships a batch of five tractors to be tested on farms in different parts of the country.
Pittman, round-bellied with thick hands, leads Clemmons and Berenthal through his plant to a mock- up of their tractor. The men discuss and debate aspects of the tractor’s construction and how that could play into its assembly once the parts are in Cuba. Should the frame be separate parts bolted together? How durable is the design? Are they missing anything?
“We gotta have this one tested, and six more built, and five shipped to Cuba for July, and I’m counting on you to do it,” Clemmons tells Pittman.
“And that’s what I’m gonna do,” Pittman replies, smiling. “The biggest thing we gotta do is make sure it lasts—that it doesn’t fail when it gets to work down in Cuba.”
After tinkering a bit more, the men sit down and discuss construction plans for the facility in Mariel. Pittman has designed Cleber’s facility to accommodatee three eightstage assembly lines that, over a four-day, single-shift workweek, could make 16,000 Oggún tractorsrs per year. “If I’m putting a part together over and over, r, it’s fast, it’s simple,” Pittman says. “It ain’t a rocket we’ree’re building here.” For the factory roof, he recommendsnds a tilt-panel design with an insulated roof, a more ore durable option that could withstand potential al hurricanes. He offers to bring down experts to oversee construction.
Clemmons explains that he’s hiring Pittman not only to erect a building orr fabricate tractor parts but also to help withith every aspect. “We’re not just looking at a building, we’re looking at an end-to- end process of turning out 16,000 tractors a year,” Clemmons tells him. Berenthal sits to his left, nodding in agreement. The facility is the linchpin of their vision, and they trust Pittman’s judgment. “We’d like to say, ‘Kelly, it’s yours—we’re dependent on you, not just for the building but the entire process.’ ”
Pittman gestures at the plans, which detail the assembly area as well as a section of offices. “If it’s going to be as successful as you say it’s going to be,” he says, pointing to the offices on the blueprints, “you’ll need more.”
Clemmons laughs and nods to Berenthal. “He was going to retire until he met me,” he says.
The men shake hands, and Clemmons and Berenthal walk out to the parking lot. “All right, I’m going to get on the road,” Berenthal tells his friend. He has to drive back to North Carolina—an eight-hour trek. Clemmons walks him to his car. He gives Berenthal a hug.
“I’ll see you next week,” Clemmons says. “We’ve got a lot to do.” <BW>
16,000 The partners are planning to build tractors a year The frame’s two halves bolt together here The frame can support an 18- to 25-horsepower gas or diesel horizontalshaft engine Weight is 1,350 lbs. The front tires can be widened, too
The hand lever controls the depth of the plow blades Top speed is about 10 mph The gas tank holds 4 gallons $10,000 Retail price: Available implements include a plow, a planter, and a cultivator The axle design also allows the driver to adjust the...