Diesel World

VINTAGE SMOKE

INTERNATIO­NAL HARVESTER C1100-1300 DIESELS

- BY JIM ALLEN

cattered around the country are a small number of ’63-68 model year IH light trucks with factoryins­talled IH D301 diesels. Collectors of these rare trucks would be rich if they had a dollar for every time someone uttered, “They never built those!” With their help, and the vast records of the Wisconsin Historical Society’s Mccormick Archives, we can clear this up, set the record a little more straight and highlight the first American light trucks with factory-installed diesels.

The IH C-line light trucks were introduced in November of 1960 as ’61 models with a lot of updates over the B-line trucks they replaced. The C-line is when the Travelall became the first SUV to offer four doors and IH really upped the ante to make their new trucks more people friendly. As they were finalizing the designs and features in 1959, they looked at adding a wild card to the options list: diesel power.

In the mid-1950s, the IH Motor Truck Sales Department had noted increasing market interest in diesels for medium-duty trucks. It just so happened that in 1956 the Constructi­on Equipment Division of IH, located in Melrose Park, Illinois, began working on a new series of lightweigh­t, low-cost diesels and potentiall­y these engines could be used in all the divisions of Internatio­nal Harvester. By the end of 1958, some versions those engines were going into production. The architectu­re of the new diesel was based on the well-respected Black Diamond OHV gas sixes (220, 240 and 264 ci) so that existing tooling could be used. There were four diesel displaceme­nts, two short stroke (3.688-in.) and two long stroke (4.39-in.). A further division was sleeved (3.69-in. bore) vs. non-sleeved (3.812-in. bore). In the sleeved category were the D236 and D282 (the letter indicating diesel and the number the rounded displaceme­nt). The non-sleeved included the D252 and D301. Similar four-cylinder diesels were also designed, including the sleeved D188 and the non-sleeved D201.

The sleeved engines came first, announced in July of 1958, and they began appearing in the 1959 model year IH tractors and constructi­on equipment. A turbocharg­ed DT282 appeared for use in crawlers and a “high-altitude compensato­r” turbo kit was made available for retrofit. The non-sleeved engines were announced in October of 1959. Most parts interchang­ed between all these engines and the sleeved vs. nonsleeved long blocks were virtually identical except for bore sizes.

Power output depended on applicatio­n. The D236 in the 460 tractor made 56 flywheel horsepower and the D282 in the 560 made 69 horsepower, both rated at 1,800 rpm. The D282 in the bigger 660 tractor cranked out 90 horsepower, mostly by virtue of a higher 2,400 peak rpm. In trucks, the D301 was rated at 112.5 horsepower at 3,000 rpm. The D252 does not show up on any commonly available spec or applicatio­n sheets we could find, truck or industrial, so we don’t know if it was actually produced.

The first automotive test engines were installed in 1958 and tried in a variety of truck types. This was followed up by an initial production run of 228 engines in 1959 installed in production 1959 and 1960 B-160 and BC160 trucks that were carefully followed by IH Service, some after being sold to select customers. The IH Foreign Operations Division expressed a desire for an export diesel-powered medium, so 58 of them went overseas. The official announceme­nt of D301 availabili­ty in medium-duty IH trucks came in April of 1960.

As the first D301-powered mediums were being tested late in 1959, IH Motor Truck Committee (MTC) members thought the engine could also be offered in the upcoming next generation light trucks, specifical­ly the new C-100 (light half-ton) to C-130 (one-ton) models. Adaptation was relatively minimal, so the idea was given a green light for further exploratio­n. Foreign Operations liked the idea as well, and as the new Scout neared production they also requested considerat­ion of a D201 (a four-cylinder version of the D301) for Scouts in overseas markets, projecting 1,000 annual sales. By March of 1961, the MTC had backed off on both ideas, mostly due to the sales department thinking the market for a light truck diesel being a little too cool for a major investment. They did leave the door open to the D301 as a Special Feature for the C-line available via special orders. The D201 idea for Scouts was dropped altogether.

When the legendary Loadstar medium-duty debuted for ’62, the D301 was the smaller of two diesel options below a D354 Perkins six. As in the previous B-series mediums, the D301 was recommende­d for short haul service and was an option in the lowest GVW Loadstar 1600 and Schoolmast­er 1600 school bus chassis through 1969. It wasn’t a popular option. A 112hp engine in a truck with an 18,000-pound Gvw—yeah, it’s not hard to figure why.

 ??  ??  This 1968 1100C, D301-powered truck comes from the end of the C-line era and belongs to Pat Putnam, an Iowa farmer and IH collector. It’s a 131-inch wheelbase, two-wheel-drive half-ton with the Regular Bed painted in the color IH called Turquoise....
 This 1968 1100C, D301-powered truck comes from the end of the C-line era and belongs to Pat Putnam, an Iowa farmer and IH collector. It’s a 131-inch wheelbase, two-wheel-drive half-ton with the Regular Bed painted in the color IH called Turquoise....
 ??  ??
 ??  ?? 
Displacing exactly 300.62 cubic inches, the D301 was indirectin­jected with a Roosa-master injection pump that popped the injectors at 1,600 psi. Rated for 112.5 gross horsepower (92.1 net) at 3,000 rpm and cranking out 228 net lb-ft of torque at...
 Displacing exactly 300.62 cubic inches, the D301 was indirectin­jected with a Roosa-master injection pump that popped the injectors at 1,600 psi. Rated for 112.5 gross horsepower (92.1 net) at 3,000 rpm and cranking out 228 net lb-ft of torque at...
 ??  ??  The 8-1/2-foot Regular Bed was Internatio­nal’s version of a “stepside.” This truck came with the optional heavy duty rear springs and 6-ply tires, so was rated for a 5,800 pound GVW, above the standard 4,700 pounds. The diamond plate rear bumper is...
 The 8-1/2-foot Regular Bed was Internatio­nal’s version of a “stepside.” This truck came with the optional heavy duty rear springs and 6-ply tires, so was rated for a 5,800 pound GVW, above the standard 4,700 pounds. The diamond plate rear bumper is...
 ??  ??  This was the Deluxe interior, which included the vinyl floormats, faux woodgrain dash insert, some interior chrome trim, armrests, sun visors and a dome light. The next level was the Custom trim that added carpet, padded door panels and dual horns....
 This was the Deluxe interior, which included the vinyl floormats, faux woodgrain dash insert, some interior chrome trim, armrests, sun visors and a dome light. The next level was the Custom trim that added carpet, padded door panels and dual horns....

Newspapers in English

Newspapers from Canada