XENO+ WiFi+BLE5.0 Nano ML Module
XENO+™ WiFi+BLE Nano ML Module is a solderable module and can be used as core ML (Machine Learning) module of new Battery powered ML edge devices of customers. This XENO+ Nano ML module is suitable for Always-On-Voice (AOV) and AI for IOT application requirements. With XENO+ Nano ML module, the customers can leverage on-board MICs (or) build carrier board to attach external MICs on to I2S/PDM pins (or) I2C sensors onto I2C pins for building their Battery-operated ML devices.
The customers can build their Embedded SW using Application Development Libs (APL) offered along with XENO+ Nano ML module. The customers can leverage FOTA and PKCE based Device authentication features offered with XENO+ Nano ML module. The Customers can save up to 40% of HW and SW development time. The module has smallest possible size and offers 2 choices of MCU: ARM Cortex-M23 @ 96MHz, 1MB Flash, 256KB SRAM or ARM Cortex-M4 @ 80MHz, 1MB Flash, 128KB/352KB SRAM. The customers can directly use CubeIDE/KEIL IDE via JTAG dongle connected to SWD port for developing their main embedded SW applications with In-System Debug Capabilities on this MCU and thus helps SW developers to debug and fix the field reported SW issues in less time.
This module has Syntiant NDP120 neural decision processor that runs multiple Audio and Sensor ML applications simultaneously with minimal power consumption. The NDP120 is designed to natively run multiple Deep Neural Networks (DNN) on a variety of architectures, such as CNNs, RNNs and fully connected networks up to 256 layers.
The module uses Innophase’s Ultra-low power WiFi b/g/n and BLE5.0 with LR, 2M PHY and Extended Advertising with single antenna for both WiFi and BLE.
The XENO+ Nano ML module can readily be used in following Customer Applications: • Human Alert Sound Sensor and Voice Commands Detection • Industrial Machine vibration/ noise Detection, Alarm Events detection • Pest Sound Detection
Contact: www.eoxys.com Tel: 91-80-23652266 Mobile: +91 9845754828 murugan@eoxys.com