The Star Malaysia - Star2

Pet makes history with 3D surgery

This dog survived to comfort his grieving family, thanks to 3d-assisted spinal operation.

- By RITA GIORDANO

IT’S HARD to keep a good dog down, and Andy, a dachshund with Yoda ears and boundless energy, was as good as they get.

Ever since he joined Lorraine and Robert Young’s Woodstown, New Jersey, home as a pup seven years ago, the little long guy had been a tireless source of laughter, licks and doggy love.

This was especially valuable to Robert, who had a rare degenerati­ve neurologic­al disorder, multifocal leukoencep­halopathy, that was increasing­ly limiting his mobility.

As Robert’s condition declined, Andy’s favourite place to lounge became the spot right next to him on the recliner. Basically, Andy was wherever Robert and Lorraine were, with a wagging tail and an eager heart.

But one morning in July, when Lorraine had to call for Andy to come to her, she realised something was wrong.

“When he tried to come to me, he was dragging his legs,” Lorraine said.

Alarmed, Lorraine brought Andy to St Francis Veterinary Center in Woolwich Township, whose chief vet, Mark Magazu, had been caring for the Youngs’ pets for 30 years.

The diagnosis: Andy was suffering from interverte­bral disc disease, a dangerous condition in which the cushioning discs between the vertebrae of the spine push into the spaces between the discs. Overnight, the disease had paralysed Andy’s hind legs.

“The longer pressure is put on the spine, the faster permanent lesions can develop,” said Magazu.

“You have a better probabilit­y of success the faster you get” into the operating room to repair the damage.

But if time was of the essence, so was precision in the tricky surgery, which required minute manipulati­on and cutting around nerves.

Lucky for Andy, St Francis is taking part in a pilot programme with Thomas Jefferson University’s Health Design Lab, which is exploring the clinical use of 3D printing for veterinary patients. Jefferson’s staffers quickly created a 3D replica of Andy’s damaged spine based on data from his CT scan that was then used to guide and inform his surgery the next morning.

Andy’s procedure was the first surgical applicatio­n of the pilot programme.

The technology to create models like Andy’s has been around for a few decades, but it has been extremely costly and not in widespread use.

In recent years, however, 3D printing is being increasing­ly explored as an aid in surgeries and other procedures, especially those that are highly individual­ised.

Kristy Shine is associate director of Jefferson’s design lab, which is funded largely by institutio­nal support, private grants and donor contributi­ons. Shine said Jefferson’s human 3D models have helped doctors with complicate­d surgeries.

In the case of a high-risk pregnant patient whose uterine fibroid growths would complicate her delivery by Caesarean section, the lab created a 3D model of her uterus to assist her doctors in determinin­g the best way to deliver her child.

The lab’s work with animals is another way of using the technology to help with individual­ised health needs.

“Anything we can do in human 3D printing can also be applied in veterinary space,” said Shine, who is also an assistant professor at Jefferson’s Sidney Kimmel Medical College.

The University of Pennsylvan­ia’s Matthew J. Ryan Veterinary Hospital has been exploring the use of 3D models for several years, from creating a model skull of a dog with a suspicious mass to making a prosthesis for a parrot.

“There’s a lot you miss when you’re looking at two dimensions” – which a CT scan provides – “and trying to build the three dimensions in your mind,” said Evelyn Galban, an associate professor of clinical neurology and neurosurge­ry at Penn’s vet school, who is working on further developing 3D printing for surgical use.

“When you can see it and touch it, there’s a tremendous amount of knowledge you wouldn’t get from just looking at a screen.”

Jefferson’s partnershi­p with St Francis helps make the technology available to a community practice. Since it is still research in progress, though, the cost of the 3D printing, so far, has not been passed on to its human patients or the owners of its animal patients.

Andy’s surgery represente­d a first in the Jefferson/st Francis partnershi­p. But there was another reason everyone hoped dearly for its success: Robert had been under hospice care at home for months, and his caretakers knew his end might be near.

“I knew what Lorraine was going through,” said Magazu, the St Francis vet. “I couldn’t imagine her losing her husband and her dog at the same time. We were going to try the best we could to not let that happen.”

Andy, in that stoic, canine way, seemed to sense the stakes.

“He had that look,” Magazu said. “’Do a good job, doc. Get me better.’ He wasn’t fearful. Andy’s not that type of dog.”

The outcome of spinal surgeries like Andy’s can vary greatly. Some dogs don’t show improvemen­t for six weeks. Others never do. But Andy wasn’t just any dog.

“He started showing small, little responses almost the day after surgery,” Magazu said. “He started wagging his tail. He started being able to go to the bathroom on his own.”

Hannah Mclean, the St Francis vet who has been working with Andy on his rehabilita­tion, believes the 3D assist made a difference.

“The technology provided a faster, more efficient, more complete surgery, which in turn led to a faster, more complete physical therapy afterward,” she said.

Lorraine was heartened by the updates she got from St Francis staff, who were taking care of Andy at their Woolwich Township hospital.

At home, however, Robert, a retired Dupont chemical operator, was weakening. After midnight on Aug 6, with his family gathered around him, he died at age 73.

Several hours later, St Francis’ staff sent Lorraine a video clip: Andy had taken his first postoperat­ive steps.

A couple of days later, Lorraine, 72, a retired medical lab technician, went to visit him with some family. To everyone’s delight, Andy ran to them – wobbly, but wagging his tail and giving kisses.

“It was a little bit of a bright spot in my day because I know he’s doing better, he’ll be coming home,” Lorraine said.

“It won’t be quite the same, not having my husband here with us. But at least I’ll have Andy back. And we can kind of move on together.” – The Philadelph­ia Inquirer/tribune News Service

 ?? — photos: tns ?? Lorraine hugs her dog, andy, on a visit to the vet after the dog received emergency spine surgery in July, and is now almost fully recovered at St Francis Veterinary Center in Swedesboro, new Jersey, the united States.
— photos: tns Lorraine hugs her dog, andy, on a visit to the vet after the dog received emergency spine surgery in July, and is now almost fully recovered at St Francis Veterinary Center in Swedesboro, new Jersey, the united States.
 ??  ?? magazu operating on andy’s spine, correcting damage caused by a ruptured disc.
magazu operating on andy’s spine, correcting damage caused by a ruptured disc.
 ??  ?? 3d computer-generated model of andy’s spine.
3d computer-generated model of andy’s spine.

Newspapers in English

Newspapers from Malaysia