Lat­est gen­er­a­tion ro­tary screw com­pres­sors

DEMM Engineering & Manufacturing - - PRODUCT WATCH -

KAESER COM­PRES­SORS’ lat­est gen­er­a­tion SM se­ries ro­tary screw com­pres­sors are now even more ef­fi­cient, thanks to a num­ber of smart prod­uct en­hance­ments, prom­ises the com­pany.

For max­i­mum ef­fi­ciency, the SM 13 and SM 16 com­pres­sor mod­els are now equipped as stan­dard with a su­per-pre­mium ef­fi­ciency IE4 mo­tor that com­plies with and ex­ceeds pre­vail­ing Aus­tralian GEMS reg­u­la­tions for three-phase elec­tric mo­tors.

For even greater in­take vol­ume and ef­fi­ciency, the lat­est gen­er­a­tion of SM se­ries ro­tary screw com­pres­sors are also equipped with the new SIGMA 06 screw com­pres­sor block, fea­tur­ing even fur­ther re­fined Sigma Pro­file ro­tors. To­gether with the IE4 mo­tor, Kaeser has been able to re­duce the en­ergy re­quire­ment of these com­pres­sors by up to 13 per­cent.

All SM se­ries com­pres­sors in­cor­po­rate a Sigma Con­trol 2. With this in­ter­nal con­troller, com­pres­sor per­for­mance can be pre­cisely ad­justed to match re­spec­tive com­pressed air con­sump­tion for op­ti­mum ef­fi­ciency. The con­trol unit fea­tures an easy to read dis­play al­low­ing all in­for­ma­tion to be viewed at a glance.

Where mul­ti­ple com­pres­sors ex­ist as part of a com­pressed air sta­tion, the Sigma Con­trol 2 can eas­ily be in­te­grated with the mas­ter com­pressed air man­age­ment con­troller from Kaeser – the Sigma Air Man­ager 4.0 (SAM 4.0). A key tech­nol­ogy in the ad­vanced world of In­dus­trie 4.0, the SAM 4.0 seam­lessly mon­i­tors and con­trols all com­po­nents within a com­pressed air sup­ply sys­tem for max­i­mum cost sav­ings, con­tin­u­ously fine-tun­ing sys­tem per­for­mance to en­sure op­ti­mised en­ergy ef­fi­ciency. In ad­di­tion, pre­dic­tive main­te­nance is pos­si­ble pre­vent­ing un­planned down­time.

These lat­est gen­er­a­tion mod­els re­main main­te­nance friendly, as­sures Kaeser. All main­te­nance work can be car­ried out from one side of the unit. The hous­ing cover is eas­ily re­moved to al­low ex­cel­lent com­po­nent ac­ces­si­bil­ity. In ad­di­tion there is no need to re­move the hous­ing cover to in­spect fluid lev­els or drive belt ten­sion, as these can be checked via a con­ve­nient in­spec­tion win­dow. Sound lev­els as low as 62 dB(A) fur­ther­more en­sure whis­per-quiet per­for­mance mak­ing them the ideal choice for point of use ap­pli­ca­tions.

The SM se­ries of ro­tary screw com­pres­sors are avail­able with drive pow­ers of 5.5 to 9 kW, and pro­duce flow rates from 0.59 to 1.62 m3/min, de­signed for pres­sures 7.5 to 15 bar. DE­TAILS, PH: 0800 447 820 WWW.KAESER.CO.NZ

Newspapers in English

Newspapers from New Zealand

© PressReader. All rights reserved.