The art of ageing
How to create the lived-in look
PERFECTION IS ALL very well, but sometimes, when it comes to our interiors, a perfect finish can make a space feel a little off-putting or even uncomfortable.
That’s not to say you should be ignoring the all-important preparation stages of renovation, or painting in a haphazard way to get a flawed finish. But sometimes a little imperfection can soften the feel of a space to make it feel warm, lived-in and inviting. It can be the difference that turns a newlook room into a space that feels like home.
The trick is to find the right products so you can ride the line between shabby chic and just plain shabby.
Why try for weathered finish
As well as simply wanting a unique, less structured finish to your project, whether it is indoors or outside, there can be practical reasons to try for an aged finish.
One of those, says Resene Colour Expert Jill Marsh, is disguise.
“Aged looks can make rooms feel comfortable and rustic, which makes them great spaces to relax in. But aged finishes can also help disguise imperfections in the surface,” Jill says. This can make them a great idea in hallways, which are high traffic areas making them prone to knocks, and where there are often long stretches of unbroken wall where those knocks are more noticeable.
An aged surface also works well in areas not in the best condition where the light hits, showing up any imperfections.
When creating a paint effect finish the first thing to remember is there are no hard and fast rules about what you should do to achieve a certain result. The finished result will be affected not just by the products you use, but also the surface you are working on. Your best bet is to experiment with colours, products, and techniques to get a look you like, then trial that combination on a sample of your surface material before you commit.
Top tip: As you work on your effect, make sure you regularly step back and check the painted area so you can keep your effect evenly spread across the surface.
To keep your look on the chic and stylish side of aged Jill recommends keeping walls a lighter neutral colour, as a backdrop to your weathered pieces, and experimenting with techniques on upcycled furniture that has the shape and style of classic antiques.
Techniques to try
Antiquing: Smear petroleum jelly on areas of furniture that would normally wear first, such as edges and corners. Paint with Resene Lustacryl tinted to your chosen colour and allow it to dry fully. Wipe away the petroleum jelly to reveal the surface underneath. Other ways to achieve a similar effect are to lightly sand areas after painting when the surface is dry, or try Resene FX Crackle which will cause your topcoat to crack showing small areas of the substrate or the base colour underneath.
Colourwashing and limewashing:
Create a broken, weathered-looking colour finish by applying a lighter base colour over your surface and allow it to dry. Using a second, similar but darker shade, mix a small testpot of your colour with Resene FX Paint Effects Medium. Brush the darker colour over the base in a criss-cross pattern. Immediately wipe the surface with a soft muslin cloth in a gentle downward motion to reveal some of the base. Limewashing uses this same technique but is often created over a textured surface such as plaster. Try in pale shades similar to traditional limewash like Resene Quarter Spanish White and Resene Putty. Rust-look: Resene FX Faux Rust Effect is a waterborne coating system which leaves interior and exterior surfaces looking aged with rust. The best effects are achieved when it is applied with brushstrokes in random directions when applying the basecoat, then add two coats of Resene FX Faux Rust Effect Activator.
Sponging and ragging: Sponging is one of the easiest paint effects to achieve and creates a lovely textural background. Coarse textured sponges provide a more lacy, open pattern and finer sponges a smoother, softer look. Start by painting your surface in a base colour and leave to dry. Dab your top colour colours over the surface lightly with your sponge to create the desired effect. Spray a fine mist of water over the design while it is still wet so your sponged colours run slightly. Ragging uses a similar technique with strips of cloth to create a different weathered texture.
If all else fails, cheat
If you’re nervous about experimenting with paint effects to create an aged look, or you want to be more certain about the result there are a number of Resene wallpaper designs that can add instant ageing.
You can try anything from an industrial weathered concrete look with Resene Wallpaper Collection 38832-3, to a subtle, aged paint-look with Resene Wallpaper Collection 38823-5.
The two important rules of experimenting with distressed or aged finishes are being patient – take your time to get a look you’re happy with, and keeping good records of how you achieved your finished look so you can repeat it elsewhere in the future.
Ultimately, the most important thing is really to have fun. Try your combinations out using Resene testpots and use this to create a sample panel. Then use that as a reference for the project to make sure the look stays on track.