You will need: Materials
• 1–2 pallets, depending on their size (we used a 2200mm-long heavyduty pallet)
• 7 pallet slats, removed from a second pallet (enough for a shelf, shelf supports and corner covers)
• 2 x 75mm 100kg load capacity wheels (optional)
• 2 x 75mm 100kg load capacity wheels, with brake (optional)
• 16 M8 x 50mm coach screws (optional; for wheels)
• 35mm external timber screws
• 100mm external timber screws
• Macrocarpa slab the size of your bar base, plus 100mm overhang on each side (ours was 1600mm long and approx. 500mm wide)
• Resene Kwila Timber Stain
• Resene Waterborne Woodsman penetrating oil stain tinted to Resene Crowshead
• Sandpaper to fit your belt sander (we used 60, 120 and 180 grit)
tools
• Belt sander
• Brush
• Circular saw
• Clamps
• Drill • Paintbrush
• Tape measure