Ready to roll!

By Photographs

Styling 4/10 4/10

2 to 3 hours R1 440: timber R950, screws and hinges R80, glue R40, sandpaper R10, castors R360 (paint is optional)

Keep all your braai essentials – from firewood and firelighters to tongs and kitchen towels – close at hand with this mobile unit.

two 295 x 258mm (drawer bottoms) two 150 x 360mm (drawer fronts) one 418 x 50mm (reinforcement for gas cylinder cupboard) one 890 x 450mm (door for gas cylinder cupboard) • one packet 6mm x 50mm chipboard screws • two cabinet hinges • one handle • two or more hooks • 200-grit sandpaper

• Alcolin Silicone Sealant

• cordless drill and 3mm drill bit • pencil

• tape measure

Measure and mark 300mm in from a long side of the two

900 x 460mm side panels and drill pilot holes. Attach the

900 x 708mm back panel at that mark between the side panels.

Screw the two 900 x 350mm sides of the gas cylinder cupboard at right angles to one of the above-mentioned side panels. Measure and mark 250mm in from the top edge and attach the 418 x 350mm shelf for the gas cylinder cupboard horizontally at that mark. Turn the trolley on its back and attach the 1 100 x 460mm top and bottom.