Organise your laundry room with a handy workstation
Tired of a cluttered laundry room? This handy workstation can be made over the weekend – just in time for washing day on Monday!
You will need
SHOPPING LIST
• 21mm laminated pine, cut to: one 1 500 x 610mm length (workstation top) two 790 x 530mm lengths (sides of the cupboard) three 450 x 530mm lengths (bottom, top and shelf of the cupboard) one 810 x 530mm length (workstation bottom shelf)
• two planed pine planks of 22 x 69 x 3 000mm, cut to: two 1430mm lengths and two 530mm lengths (top frame) one 500mm length, cut lengthwise (shelf supports)
• two planed pine planks of 22 x 95 x 3 000mm, cut to: two 1 300mm lengths and four 470mm lengths (bottom frame)
• two turned 890mm table legs with square tops and bottoms
• two packets 6mm x 40mm chipboard screws
• one packet 8mm x 30mm chipboard screws
• Alcolin Fast Set Glue
• 150-grit sandpaper
• Alcolin Woodfiller
TOOLS
• cordless drill and 3mm drill bit
• pencil
• tape measure