DAIWA MAKES THE BEST TOP KITS IN THE BUSINESS!

Generic Interlastic Power Kits

A classic power kit for all current UK-made Daiwa poles, capable of taking elastics between a No16 and No20 depending on tip diameter. You get plenty of added extras including a pre-fitted PTFE bush, Interlastic side puller bush slot and PTFE Nose Cone at the tip of the No3 section. Tip diameters are 4.7mm or 5.8mm for thick hollow elastics, with a classic black or the increasingly popular grey ‘cloud’ finish. Generic Interlastic Power Kit 4.7mm diameter RRP: £115 Generic Interlastic Power Kit 5.8mm diameter RRP: £115 Generic Interlastic Cloud Power Kit 4.7mm diameter RRP: £125 Generic Interlastic Cloud Power Kit 5.8mm diameter RRP: £125

Generic Interlastic F1 Speed Kits

For tackling F1s with shallow pole rigs, this one-piece kit is just the job. Measuring 1.83m, elastic can be run down the whole length to cut down on bumped fish or hook pulls, and it fits all current UK-made Daiwa poles. There’s an Interlastic side puller PTFE slot fitted plus the right-sized PTFE bush with two different tip diameters and a choice of plain black or grey ‘cloud’ finishes. Generic Interlastic F1 Speed Kit 4.7mm diameter RRP: £90 Generic Interlastic F1 Speed Kit 4.0mm diameter RRP: £90 Generic Interlastic F1 Cloud Speed Kit 4.7mm diameter RRP: £100 Generic Interlastic F1 Cloud Speed Kit 4.0mm diameter RRP: £100

Generic Big Bore Power Tops

To complement the range of new Daiwa generic No3 sections you can match this powerful big bore tip to each one, creating a Power top-2 kit right for you. Made with MSG carbon technology, these tips are pre-cut and fitted with a PTFE bush. They’ll slot into the No3 sections of all current UK-made Daiwa poles, useful if a tip breaks. Pick from a natural black or grey ‘cloud’ colour in tip diameters of 4.7mm (rated to a No16 elastic) or 5.8mm (rated to a No20). Generic Big Bore 4.7mm Power Top RRP: £40 Generic Big Bore 5.8mm Power Top RRP: £40 Generic Big Bore 4.7mm Cloud Power Top RRP: £45 Generic Big Bore 5.8mm Cloud Power Top RRP: £45

Generic Pre-Bore Power Kits

For carp work, there’s little to beat these powerful kits rated to a No16 or No20 elastic. There are two to pick from, at 4.7mm for standard carp and 5.8mm for the thickest of hollow elastics. All are fitted with a PTFE bush, A PTFE nose cone in the No3 section and a pre-wrapped band for fitting a side puller system. You can also choose from a classic black or light grey ‘cloud’ finish, and these kits all fit current UK-made Daiwa poles. Generic Pre-Bore Power Kit 4.7mm RRP: £90 Generic Pre-Bore Power Kit 5.8mm RRP: £90 Generic Pre-Bore Cloud Power Kit 4.7mm RRP: £100 Generic Pre-Bore Cloud Power Kit 5.8mm RRP: £100

Generic Match Kits

From a standard top-3 to a top-5 for deep rivers and lakes, all are made with HVF Carbon technology, pre-cut and fitted with a PTFE bush. The No3 Section has a PTFE nose cone. These kits fit all current UK-made Daiwa poles, rated to a No8 elastic. Generic Top Three Match Kit RRP: £85 Generic Top Four Match Kit RRP: £170 Generic Top Five Match Kit RRP: £275

Zoom Cupping Kit

This cupping kit represents a move away from single-length fixed tops, the adjustable kit allowing you to feed using the Zoom between 2.21m or 2.76m. So whatever length of top kit you are fishing with, your feed will be on the button. Extremely strong and rigid, the heaviest balls of groundbait can be shipped out with ease, and you also get a Daiwa pole cup set supplied. RRP: £99.99

Generic No3 Section

Should disaster strike and the No3 section on your UK-Made Daiwa pole break, help is at hand with this low cost but high-grade generic section. Topped off with a PTFE Nose Cone in the tip, this will help with elastic performance when playing fish. RRP: £45

Pre-Bore Generic No3 Section

Transform a Match Kit into one that can take a side puller system in seconds with this generic Pre-Bore section that features a strong pre-wrapped band for drilling out. Light yet powerful for carp work, the PTFE nose cone helps elastic to perform perfectly and it’ll fit on all current UK-made Daiwa poles. RRP: £50