TEN-MINUTE MAKE
MAKE MY SMOKESCREEN FEED
I like to feed a mixture of small floating baits to get the carp feeding. Liquid and powdered additives increase the attraction of the bait and make it more difficult for the carp to spot the hook and line.
FEW ITEMS of tackle can have made such an impact as the Method feeder. It’s certainly transformed the way we fish for carp on commercials, immediately giving the angler pinpoint bait and feed placement and presentation. In many cases there’s no need to strike – the carp hook themselves!
From those early days when DIY feeders looked more like pieces of scaffolding than fishing tackle, things have moved on at a rapid pace and we’ve now refined the Method to become a deadly weapon in any angler’s tackle box.
The mechanics of the Method have changed little – the feeder slides on the line with a short hooklength below it, a fish takes the bait, then registers a positive bite that at times almost pulls the rod into the lake! Exciting stuff, but if you want to catch to the max there’s a bit more to it than just casting out and waiting.
Which Method feeder?
There are a lot of feeders to pick from but I use the Middy Gripper, for two reasons. It has more weight at the front of the body, and this helps it cast better and more accurately in any wind. It also stays put even on an underwater slope, or if there are a lot of feeding carp in the peg that could otherwise move the feeder out of position by bumping into the line.
However, it’s still important to use the lightest feeder that you can get away with, and try to land it gently on the surface by feathering the cast.
Be accurate – and quick!
Never leave a bad cast out and think ‘that’ll do’, because it won’t. The key to catching well on the Method is to gradually build up a small bed of feed in one spot and get the fish feeding right on top of it. This way, bites will be quicker in coming than if you cast all over the place. If you cast and the feeder lands in the wrong place, wind in and cast again.
Regular casting is a must in summer when the fish are active and hungry. A bite should come quickly if the carp are there, so leave the feeder in the water for no longer than two minutes at a time. It’s useful to have a stopwatch to monitor bite times, as a pattern will develop and you’ll be able to work out how long it’s taking fish to find the bait. Wind in if nothing’s happened by then and cast again.
Tip tension
I like to have a slight bend in the quivertip so that I can see any drop-back bites if the feeder is dislodged. Once I’ve cast, I tighten up to the feeder but I don’t move it once it’s in position. This slack offers you a little line to get back on the reel when a fish is hooked and it sets off on a run before hitting the line clip.
When you get a proper pull round bite on the Method, just pick up the rod – the fish will already be hooked. Strike and you may pull the hook out!
When playing a fish, keep the rod-tip low as you reel in and only lift it up to net the fish. If you get into a rhythm, you can lift and net the fish quickly, ready to catch another.
Get set up correctly
Savage bites can pull the rod in, so it’s crucial that you have it set up securely to minimise the chance of this happening. I use a front rest with higher support at the end nearest the feeder at a slight angle, and then a back rest to secure the rod butt. This way your rod should stay safe in case of a rip-roaring bite!
What to feed
Micro pellets or groundbait? I’d advise taking both. I prefer to start with just groundbait around the feeder, Adrenaline’s new Mega Byte Carp Method Mix in either Red Krill or Scopex Yellow. If this isn’t working, I add dampened micro pellets to the mix, varying the ratio of pellets to groundbait to try and work out what the fish want – I could end up using mainly pellets with just a spot of groundbait.
Speedy feeder-making
Years ago, we used to make the Method feeder up by squeezing the pellets or groundbait around it by hand – often only to see the ball of bait explode in mid-air! Thankfully, there are now moulds to fit all feeders that do the job for you. For the Gripper feeders the Middy Compacta mould is brilliant, letting me make a ball up in seconds and ensuring it is the same size each time and compacted perfectly so it’ll stay intact until it hits the water.
Strong tackle is needed
Tackle takes a lot of stick with big carp, and this is especially the case with the Method. Bites are fierce, and if you use too light a hooklength and too small a hook, you could easily end up being broken when you pick the rod up. In summer, I’d fish 8lb Middy M-Tech Carp Commercial mainline to a 4ins hooklength of 0.18mm (6lb) Middy Lo-Viz line and a size 14 Middy KM-1 hook.
You can tie your own hooklengths, but I see nothing wrong in using pre-tied Middy Method feeder rigs. These have the bait band, spike or lassoo attached, so you’re ready to go straight out of the packet!
Vary your hookbaits
What to put on the hook is a real minefield, as so many baits can work. Corn, meat, hard pellets, wafters, even good old dead red maggots all have a place. My advice is to keep chopping and changing until you find what’s catching best. To help this, I have a quickchange bead for attaching the hooklength so I can change over quickly from a bait band for wafters, to a lassoo for pellets, or a spike for meat.
Try loosefeeding
What’s around the feeder doesn’t have to be the only feed. If it’s within range, fire 6mm hard pellets over the top of the feeder with a catapult. This not only puts more feed into the water, but also makes a good amount of splash on the surface, noise that will attract carp into the area.