Stringwalking for beginners
Kristina Dolgilevica explains all
Barebow archers use the tip of the arrow as the aiming device and employ the following three methods of aiming: gap shooting; stringwalking; and facewalking. Face and stringwalking are often combined. Finding the right match for you requires an in-depth understanding of your form, equipment and individual anatomy – only then can these methods be of any use on a consistent basis. Stringwalking is used to its full advantage in field archery, where targets are set at a range between 10 and 50 metres (the longest competition distance for this division).
I would like to share some useful tips, precautions and simple step-bystep instructions to help you begin your stringwalking experiment with confidence. I find it useful to explain and remind beginners how barebow aiming works, and how each method affects your performance and equipment, so that you find the optimal combination for you.
Aiming Methods: How Do They Work?
All of the barebow aiming methods are focused on creating the best angle for the arrow’s launch for it to reach a specific distance: the arrow tip is used for height sighting, the string and riser window for windage sighting. You can choose between the configurations that allow for aiming in the middle of the target and those that use the principles of compensation, aiming off. When you switch from recurve, the first technical changes you introduce are: hook moves under the arrow, and anchor moves higher to help create a better aiming picture. The best starting anchor position is directly under and along the natural contour of your cheekbone: it is more solid and repeatable, and ensures your drawing arm is in line and that your string picture stays inside the riser.
In gap shooting, you have a fixed anchor and a fixed hook position on the string (eg under the cheekbone + hook directly under the arrow); you will be sighting the arrow tip outside the target centre to find the gap for every distance you shoot, until you find your ‘point on’ distance (where you aim in the
middle and hit the middle). The average ‘point on’ distance range is between 30 and 45 metres. ‘Point on’ is individual and depends on many factors, bow poundage and arrow length being just a couple of the deciding variables. The shorter the distance, the lower the point of aim (under the target centre); the longer the distance, the higher the point of aim.
If you change the anchor (facewalk), you change the angle of the arrow’s launch. For example, if shooting at 50m with your current anchor and set-up you can only reach that distance by aiming above the target, lower your anchor or switch to Olympic-style anchor (and/or hook) to create a steeper angle in order to aim at the target and reach it. That is the basic premise of facewalking – the facial mark ‘walks’ up and down the face (sometimes closer to/farther away from the lip) to create a different angle and picture. Choose facial marks higher on the face for shorter distances (closer to the eye) and lower on the face for longer ones (farther from the eye). Sacrificing a reliable anchor, switching from one facial mark to another intermittently, will prove to be unreliable and frustrating. Best to select and stick to one linear, hard tissue facial mark for a while (such as cheekbone, jawbone, teeth).
In stringwalking, typically the archer will have a fixed anchor and a different hook position on the string. Here, like the sight pin, the arrow tip is always on the gold, unless you need to compensate against wind. Your finger position will ‘walk’ up and down the string to affect the angle of the arrow’s launch. The distance between the arrow nock and the hook is known as ‘the crawl’. Every stringwalker will have a different ‘fixed crawl’ for each distance they shoot. The closer the distance – the lower the crawl, the hook moves down (away from the nock); the further the distance – the shorter the crawl, the hook moves up (towards the nock). Experienced stringwalkers will always look for the smallest ‘crawl’ possible, because it is best for their equipment long term. NOTE: stringwalking works well with modern recurve equipment, so do not try this with a longbow or other traditional bows as they cannot withstand the unbalancing stresses.
Opt for a fixed split or three-under hook and a ‘facewalking/gap shooting’ combination instead. To sum up, when you are switching from recurve and wish to continue following your aiming habits, sighting in the middle, then stringwalking, is your best method.
to Start: Equipment
To get the best performance out of your set-up and minimise the possibility of equipment damage, change your tiller to ‘neutral’ and start by shooting with your hook directly under the arrow, ensuring your setup feels balanced. As you ‘walk’ down the string, change your tiller to negative: lower limb bolt out; upper limb bolt in. Provided you have the right amount of balancing riser weight, you will always sense the amount of tiller adjustment you need: look out for changes in your bow grip pressure point and the top limb ‘kickback’. This will help you ensure that both limbs are working in sync. Remember to listen for those quiet shots; ask someone to help you listen to your bow as you shoot and always check your brace height. Make sure that you write down all the changes to the tune of your equipment and technical configurations for each distance – it will be easier to keep track and make sense of the process.
Equipment: String and Nocking Points
Rules around the bowstring are straightforward, but it is worth mentioning that the height of the central serving must extend above your eye level, so it cannot assist aiming in any way. In order to reduce the ‘crawl’ indoors, some archers will use longer arrows and install their nocking points slightly higher, so that the arrow tip is pointing lower.