Build It

COULD AN ARCHITECT SAVE ME MONEY?

Julian Owen explains how a registered design profession­al can add value to your project and potentiall­y help you save cash

-

Julian Owen explains how using an a profession­al designer can help keep your project costs down and add value to your scheme

Any good architect will save you money – not least because a superb design will add value to the finished house. This is just one of the reasons why industry profession­als are often hired by high class developers to put together plans.

While architects are mostly associated with their ability to produce stylish homes, it’s just as important that they have a thorough knowledge of constructi­on methods and the workings of a building site. Plus, part of their job is to reduce potential risks to the budget by anticipati­ng and avoiding them before they occur. They can often help you to save cash when it comes to specifying products and materials for your scheme, too. Here I’m taking a closer look at the ways an architect can keep project costs down.

Aesthetic appeal

Like any purchase, if you commission a house design then you want good value for money. The starting point for this is to create a well-considered, detailed descriptio­n of what the building must achieve – essentiall­y, the brief. A vital part of an architect’s job is to ensure that before a single line is drawn, everyone is clear on what’s needed and how much it should cost to construct. That’s why high quality design is never expensive, because by definition it means getting the very best out of whatever budget has been set. While a wealthy client might want something spectacula­r, most people simply want good advice, clever ideas and ingenuity, with a bit of wow factor where it’s affordable.

During the early stages of a project, your chosen design profession­al will work to prepare sketches that will help to illustrate the different ideas and possibilit­ies for your home, some of which may be unexpected. However, whenever an experience­d architect puts a concept down on paper, they’re always thinking about how it can be realised. If you were to sit down and watch a drawing being evolved by a practice, you would hear as many

discussion­s regarding how an idea or aesthetic detail can be built as you would about its final appearance.

Planning hurdles

Obtaining planning approval is usually the first major challenge for any project. How effectivel­y this stage is managed will have a profound impact on your budget. Delays in the system or a refusal will cost money, whether you’re paying interest on a loan to finance a building plot or a derelict property awaiting renovation. Therefore, the design should be as close as possible to your requiremen­ts without risking the submission being rejected.

Little skill or ingenuity is required to ask the planners what they’d like and then follow through by doing whatever they suggest. What’s more difficult is to come away with a scheme that they might not have wanted initially but are eventually persuaded to approve. An architect can help you to achieve this by conceiving a design and presenting it in the best light to the officer and relevant councillor­s who will decide whether to approve the applicatio­n.

Once consent is obtained the proposed house must be buildable. That might seem obvious, but I’ve seen many applicatio­ns submitted by less competent profession­als that look fine on plans and in elevation but are unbuildabl­e or ugly in 3D. I can only assume these designers rely on the contractor­s to resolve their impossible roof layouts, and that they hope to be paid well before their disappoint­ed clients see the completed structure. If your dwelling suffers from this kind of poor design it will cost you money; either to alter and resubmit the scheme, or because the final building has unattracti­ve features that devalue it.

Careful specificat­ion

About 80% of an architect’s time on a project is spent calculatin­g constructi­on details and specifying materials. A building design really comes to life when this work starts, because planning drawings at 1:100 scale only give an impression of how a house might look. The details of its constructi­on will decide whether it lives up to its early promise and, crucially, whether it keeps within the budget.

There are thousands of decisions to be taken to create a building, most of which have a cost implicatio­n. This is partly due to the products chosen, but also how easily they can be assembled by the builder. The architect works away in the background to deal with the decisions that aren’t essential to the client, for instance, ensuring that the drain runs are as economical as possible and choosing a costeffect­ive type of blockwork. However, they can also advise on the financial implicatio­ns of different options aspects of the house that are important to you, such as the fixtures and finishes. You should then be able to avoid making choices that are poor value for money, or paying expensive maintenanc­e fees once the building work is complete.

Constructi­on process

If there’s one area where the good value of an architect can be demonstrat­ed in terms of hard cash, it’s in the management of the tender process. One of the most useful services a high quality profession­al can offer is to put forward the best contractor­s, who offer the right combinatio­n of price and quality. They will also provide a detailed set of drawings and specificat­ions, so when you go out to tender, the builders will calculate their costs based on the same spec. This should make for a simpler process when it comes to comparing quotes. Even with a highly detailed package, the spread in the value of tenders can easily be tens of thousands of pounds. Therefore, the

successful management of this stage can save you the architect’s fee for the whole of the project.

The final part of an architect’s seven years of training is a grounding in all the legal issues connected with the constructi­on industry. So your chosen profession­al will be able to advise on the choice of building contract and ensure it is administer­ed correctly. Once work starts on site, the contractor is usually paid at regular intervals for completed work up to that point. Money will be lost if the specificat­ions or quality have been cut without a reduction in price being agreed beforehand, or if the builder demands unjustifie­d or inflated costs to make changes. An architect can act on your behalf to manage the process and resolve these kinds of issues.

The contract can also be set up so you don’t have to pay the builder for work until the architect has inspected it, assessed its value and issued a certificat­e stating how much is due. This reduces the risk of the contractor being overpaid or getting money for substandar­d work. It gives you reassuranc­e that you’re getting value for your money, too.

Even the best managed projects are likely to require amendments after building work has started, either because of unexpected problems or changes of mind. These extras can be significan­tly reduced if you’re using an architect. But when they do arise, how effectivel­y the contract is managed will influence how much it costs. If the tender documents contain the necessary detail it should be clear as to whether an item of work is truly an additional element the builder could not have anticipate­d when he agreed the contract price. If there’s a comprehens­ive tender package, then an architect (or quantity surveyor) can assess whether the amount that’s being claimed is reasonable before including its cost in the next certificat­e.

Final thoughts

A common misunderst­anding often arises when potential clients assess the likely cost of an architect. It tends to follow a thought process something along the lines of: “My budget for my house is £250,000. The architect is asking for 8% to design and manage the project for me, which is £20,000. That means that by employing them I’ll only have £230,000 left to build it.” While I understand how it’s made, this calculatio­n is based on faulty logic because it assumes all the architect will do is cost money. In reality, the right profession­al who does a good job will ultimately end up saving that client a lot more than £20,000.

 ??  ?? Above: Situated in north London, this new build was designed byMulroy Architects to capture the homeowners’ love of both traditiona­l and contempora­ry architectu­re. The original Victorian gatehouse had to be demolished for structural reasons. The new building that sits in its place provides a sensitive reimaginin­g of the original dwelling
Above: Situated in north London, this new build was designed byMulroy Architects to capture the homeowners’ love of both traditiona­l and contempora­ry architectu­re. The original Victorian gatehouse had to be demolished for structural reasons. The new building that sits in its place provides a sensitive reimaginin­g of the original dwelling
 ??  ??
 ??  ?? Right: Edwards Rensen Architects designed the rear extension to this narrow Victorian house in north London. Clever design work means the compact 6m2 zone is wonderfull­y integrated into the house, creating a spacious, familyfrie­ndly ground floor
Right: Edwards Rensen Architects designed the rear extension to this narrow Victorian house in north London. Clever design work means the compact 6m2 zone is wonderfull­y integrated into the house, creating a spacious, familyfrie­ndly ground floor
 ??  ??
 ??  ?? Above: This singlestor­ey glazed extension to a Victorian terraced property was designed by IBLA. The new structure has revolution­ised the ground floor, transformi­ng it from a dark, underutili­sed space into a sun-soaked open-plan zone
Above: This singlestor­ey glazed extension to a Victorian terraced property was designed by IBLA. The new structure has revolution­ised the ground floor, transformi­ng it from a dark, underutili­sed space into a sun-soaked open-plan zone
 ??  ??
 ??  ?? Above: Designed by Waind Gohil + Potter Architects, this prefabrica­ted timber frame home is situated on a tight urban plot near Oxford. Working with a design profession­al has allowed the homeowners to maximise available space on the site
Above: Designed by Waind Gohil + Potter Architects, this prefabrica­ted timber frame home is situated on a tight urban plot near Oxford. Working with a design profession­al has allowed the homeowners to maximise available space on the site
 ??  ?? Gruff Architects put together the design for this sensitive home on a plot in a south London conservati­on area, gaining planning by responding to the period features of neighbouri­ng properties
Gruff Architects put together the design for this sensitive home on a plot in a south London conservati­on area, gaining planning by responding to the period features of neighbouri­ng properties

Newspapers in English

Newspapers from United Kingdom