Fitting the rainscreen cladding
One of the elements I love about the Education House design, which was drawn up by architect and Build It expert Opinder Liddar of Lapd Architects, is that it strikes a fantastic balance between clean contemporary lines and soft, textural finishes. That’s partly down to the mix of external materials: particularly the crisp white render, timber cladding and characterful roof tiles. Choosing the right cladding was always going to be crucial, then. There are all manner of species and profiles to choose from – from the likes of Western red cedar through to the modern fad for charred woods. For the Build It House, we wanted something that would give us a blend of wow factor and durability, as well as fit with most self builders’ budgets. And we found it in Russwood’s Siberian larch.
A slow-grown, high-density timber, Siberian larch is one of the toughest softwoods around – with a typical lifespan of 50-100 years – making it perfect for external cladding. It’s easy to machine, too, so it’s available in a wide range of profiles. Russwood offers an advanced option that’s factory-coated in SIOO:X, a water-based silicone treatment that helps to give that lovely weathered appearance at an accelerated rate. It’s a clever solution that prevents the differential weathering you sometimes see on more exposed elevations, beneath windows etc – although it does add to lead times (we needed to place our order about six weeks before we wanted the cladding on site).
Fitting the cladding
Russwood’s MD, John Russell, recommended a rainscreen format. This arrangement features narrow strips of timber (ours are 70mm wide) with a chamfer at the top and bottom to allow water to drip down the face. We’re fixing it horizontally onto vertical battens (which will hold a breather membrane onto the ICF walls), with an 8mm gap between boards. This design encourages airflow behind the cladding to ensure any moisture that does penetrate evaporates effectively. In total, Lapd estimated we needed 108m2 of cladding (including a 10% allowance for cuts and wastage), along with 51m of larch stop beads.
Once the stud walls were done inside, Drewett & Hunt’s carpentry team shifted their focus to prepping for the cladding. Stage one was treating all the battens with a black exterior-grade paint, to hide them against the membrane and reinforce the shadow-gap effect. They’re fixed at 400mm centres, with extra lengths where needed, such as at corners and some structural openings. We got this done before the renderers started because if you try to screw battens in afterwards you’re likely to end up with cracks and chips where the materials join.
We’re trying two fixing techniques for the larch, to demonstrate the different effects you can achieve. On the most visible elevations, we’re using Fassendenclips, a secret-fix system that means you won’t see any screw or nail heads. This method simultaneously creates a tiny gap between the back of the board and the vertical baton, enhancing ventilation and the durability of the timber. Russwood had a Facetime call with Drewett & Hunt to run through the details of how it works.
The results are crisp and sleek. Our chippy found it straightforward to use, but it was undoubtedly slower (with higher labour costs) than the more conventional method we’re using on a short stretch of cladding on the wall facing the neighbouring plot. Here, we’ve gone for a Kompefix strip (flexible PVC) between battens and boards to aid ventilation, while the larch is fixed with special stainless steel screws that don’t need predrilling. Demonstrating the implications of these kind of choices is a big part of what we want to achieve with the Build It House.