REFITTING THE REAR SUBFRAME

 When Chris 1 was ready to refit the rear subframe, he positioned it on the wooden pallet and trolley, then carefully lowered the MGF back down over it, making sure nothing was in the way.

 The rearmost

2 mounts were loosely fitted at first, ensuring the handbrake cable wasn’t in the way. When Chris was satisfied the rear subframe was correctly positioned, he further tightened all the nuts and bolts for each of these mounts.

 Raising the

3 whole vehicle on the two-post ramp, Chris secured the frontmost mounts to the underside of the bodywork.

 He then 4 returned to the rearmost mounts and fully tightened all the nuts and bolts for each of them. All remaining parts were now refitted in reverse order of removal.